There are newer Scientific Principles of Magnetic Fields. To view such a procedure https://www.youtube.com/watch?v=_TlP9q6TnY4   [End]
[retrieve this message]

---

RE: here are my interests with features and capabilities as of now: -simple use/maintenance -durability and quality -of the smallest particle size range -reputable in community -budget friendly   A. Unfortunately, I am rather inept when it comes to generators as I chose to go the DIY route nearly a decade ago and have not ventured into the generator market as a result .  With that said, and based on my own limited experience, I’d say the Silvertron is the most advance generator I know of in terms of function and versatility.  No cl ... [Image Embedded Here]
[retrieve this message]

---

Man, not only did you address all of my concerns in the most considerable manner, but you also reminded me of the whole reason for my interest in the realm of healing; which I experienced through the incredible feeling I when saw and read your reply to my concerns. I am grateful for your empathy, and your consideration toward my personal concerns. You are truly a hero in this world, and a godsend to so many of us, and I hope and pray you continue to be so generous in sharing your knowledge with compassion to others that seek it. Thanks for clearing up those questions I had, they have re ...
[retrieve this message]

---

Do you use the term Colloidal Silver interchangeably for other types such as ionic silver? 1. Test whether the solution is colloidal: place a condensed light or laser through the solution, if you see a Tyndall effect, then you have a colloidal solution 2. Determine whether or not the solution contains silver - ie, was it made with pure silver? 3. Then decide what you want to call it :)   Why not call it Ionic Silver:  Some people prefer to call it Colloidal Silver, as this was the original name given to the solution from the beginning.  Though that doe ...
[retrieve this message]

---

So, I’m going to address a few things that I’m a bit confused about regarding your write ups on colloidal silver. Do you use the term colloidal silver interchangeably for other types such as ionic silver? I ask this because of your post defining all of the differences with the types of “colloidal silvers”, and how they are improperly using the term interchangeably. This is from the report comparing various silver generators, since much of the time you referred to the silver as colloida silver. Also, since you’re convinced that the optimal silver is ionic silver, why not just use it as y ...
[retrieve this message]

---

Very questionable IMO. I purchased some of your Atomic silver from the eBay store which was the only place I could find it available in the UK. It cost me a lot of money for a 16 floz 2000ppm bottle. The website URL on the bottle is identical to the one in your profile BTW. I have used Reduced Colloidal Silver ie the stuff you describe as the ineffective stuff due to the large particle size. It largely ie 2/3 rds destroyed a biofilm protected infection which I believe is a gram positive Staph infection in my stomach which allowed my digestive system to heal. It did fail to destroy al ...
[retrieve this message]

---

Great to see studies emerge on how Atomic Particle Colloidal Silver outperforms nanoparticle colloids. Few Atom Silver Clusters Display Broad Spectrum Antimicrobial Activity” ​ https://www.cell.com/biophysj/fulltext/S0006-3495(16)34220-5?fbclid=IwAR3ZJ6pQcyGxCpTQuk-tOEjz3y5GfG_buD9DO_9N0iVD-YFQ9wcWaUCq8Qk Article Info: Publication History 2917-PosB524 IDENTIFICATION DOI: https://doi.org/10.1016/j.bpj.2016.11.3190   [End]
[retrieve this message]

---

Even at the lower PPM they sell, they do not use chemicals.   [End]
[retrieve this message]

---

Hi guys. Wondering about personal experience with CS like Mesosilver or GoldenGevity for candida, prostatitus and sibo. Been on antifungals for awhile, tried Iodine and an anti candida diet but wanting to try a good colloidal silver for all this then build my gut bacteria back up. Done a fair amount of reading and even tried this sovereign silver crap my naturopath suggested. Man did that not work and just exhaust me. Been looking at reviews and the difference between real and ionic silver. If ppm really matters compared to particle size and bioavailability. At a bit of a cross roads ...
[retrieve this message]

---

Hi, I know this question is old but if someone looking fr the answer runs across it, they’ll have it later. Yes apparently it is safe enough for Doctors to administer 60cc’s of it for $160. I am presently taking colloidal silver intravenously. It seems to be working fine, no adverse over the top effects other than areas infested get itchy and area seems to look dryer than usual w dead skin covering. but since I know what I’m looking at its the parasites in that area that evidently have been expelled or attempted to get away from the silver but died in the process. Yes it works throughout ...
[retrieve this message]

---

I want to testify about the healing power of colloidal silver. I am a young man in my late 30’s. Late 2016, I had a fever to which i took some antibiotics and it subsided. Then about 2 weeks later, I developed some rashes on the lower part of my abdominal area and arm. They were in clusters and itched frequently. The fever started again and I took the remaining antibiotics prescribed when it first started (I didn’t finish the medication cos I hate swallowing pills) and though it subsided, I had hot flashes even though the weather was quite cold at the time. I applied some antifungal cr ...
[retrieve this message]

---

The best info I have is the following forum which has guides and information on how it is done and why: https://www.cgcsforum.com/index.php?board=40.0 The following topic in particular: https://www.cgcsforum.com/index.php?topic=1143.0 Maltoxdextrin is often used commercially for products which are sold as Reduced CS. The pH is important because it does not reduce correctly without a high pH 7. The guy on that forum recommends corn syrup but that is difficult to get here, at least a pure corn syrup without additives. I have tried maltodextrin and also maltose and next time I intend t ...
[retrieve this message]

---

At least the ionic crowd is not nearly as militant here for the most part as they are in some places on the net. Ah, the stories I could tell and encounters I have had! Perhaps worth noting is that practically all ionic silver does contain some colloidal silver - generally up to 15%. By the same token, most ”true colloidal silver” solutions actually contain some ionic content - and that too is generally up to 15%. Thus, no matter how inferior ionic silver might be for internal applications (it is fine for most topical applications), it would still be effective internally due to the col ...
[retrieve this message]

---

True colloidal Silver or even Reduced Colloidal Silver made from Ionic CS is not effective against bacteria inside a biofilm which is their preferred place of residence. Biofilms are negatively charged and Ionic silver is positively charged and Ionic Silver is attracted to the biofilm and does not do anything to any micro-organisms inside the biofilm. True Colloidal Silver or Reduced Colloidal Silver has not charge and therefore is not attracted to the biofilm, instead it can destroy the micro=organisms inside the biofilm. I have tried Ionic silver and I have tried Reduced Colloidal ...
[retrieve this message]

---

Purest Colloids (Mesosilver) uses their own labs - but I trust their results (other than the fact that Utopia Silver’s Advanced Colloidal Silver has improved significantly since it was tested). I have also seen independent lab results for Advanced Colloidal Silver, which is very much a true colloidal silver (about 85% of the silver is ultra small particle colloidal silver). Most recently Advanced Colloidal Silver has had their PPM increased to 30 PPM. Full disclosure: The owner of Utopia Silver is a lifelong friend of mine. I worked in an office directly above his ”Star Wars” productio ...
[retrieve this message]

---

Ionic silver is not bad for you unless it is improperly made. From everything I have researched and observed, true colloidal silver is much superior internally. I trust the information at Purest Colloids. I also trust my friend Steve Barwick, at least to a fair degree - but we should always keep in mind that it is to Steve’s advantage to write and link to things which say that ionic silver is superior. Also, there actually are home generators which make real colloidal silver. A bit pricier, but they are out there. The silver they produce is not up to the quality of Mesosilver or Advance ...
[retrieve this message]

---

I COMPLETELY agree with your statement. Steve is selling a product and is making a VERY good living off of it. There is too much research surrounding REAL Colloidal Silver. Everyone and their grandma can make Ionic Silver in their garage, but it ramps up the cost to make TRUE Colloidal Silver. MesoSilver is the ONLY one I have found to produce actual labs proving their product is the real deal.   [End]
[retrieve this message]

---

I am having a very hard time believing Steve Barwick. I used to consider him the master of it all, but after researching heavily, I do NOT believe that Ionic Silver is good for our bodies. Just read the overwhelming facts and research from this site here: http://m.silver-colloids.com/?url=http://www.silver-colloids.com/Pubs/truecolloidalsilver.html&nosim=true&utm_referrer=#2710 I am looking to kill some serious infections inside my body and I have been ran through the ringer with lying / uneducated doctors for the past 2 years. That website I posted shows MesoSilver labs proving i ...
[retrieve this message]

---

What exactly is an ”Ionic Transport Systme” and how does it magically transport silver ions directly to places where they are needed as opposed to colloidal silver particles ”floating around in the bloodstream”? I can find no proof of such a system as relates to ionic silver produced by a silver generator. My friend Steve Barwick has increasingly written about the benefits of ionic silver over colloidal silver. Do you think that might have anything to do with the fact that he sells ionic silver generators? He makes a very good one, to be sure, but I and many others totally disagree that ...
[retrieve this message]

---

Hey guys just gone through this minefield myself, not fun but good to test the thoroughness of my research abilities! What do you make of the reasoning that ionic silver immediately bonds to the salt in plasma making silver chloride, as put forward in this argument?! All very confusing, just got some Acs 200 and trying to work out whether or not it’s worthwhile. Made me feel very dizzy and cloudy headed.. Would love some advice. T Here’s the article about the Nacl this and Barwicks reasoning on the transport system is convincing if lacking a direct refutation of the silver chl ...
[retrieve this message]

---

www.curezone.org/forums/fm.asp?i=2377779#i its akin to racism...   [End]
[retrieve this message]

---

By the way Trappers lies are being witnessed by many because it wasn’t only us that saw his posting before he deleted it. This is what he posted to me www.curezone.org/forums/fm.asp?i=2377618#i This posting he now claims was for good intentions but if you read how the thread runs you will see it’s another lie of his. How low can a person sink.   [End]
[retrieve this message]

---

How sick is this. I am going to be hounded for having an autistic son. Trapper has been checking out my postings about my critically ill son on Curezone and has requested a new forum from the webmaster to discuss such matters. He has looked into all my postings on the dysbiosis and candida forum and autism forum and wants to discuss him, he openly put this in his posting. Now Trapper is a man who likes to give but can’t take. Everyone on Curezone needs to be aware of him. He has moved in on the Christian debate forums and drove people away, he has discussed the Dysbiosis and ca ...
[retrieve this message]

---

Still want that pic Grizz! :-D Seriously though, seeing a picture of the Tyndall effect from your machine would help me out a ton. There isn’t much out there in regards to pictures of that, at least from what I could find. I definitely cannot call the guy who makes the SG6 machine, because I tried once in the past and he has one cranky dude! I just made a batch last night, and it came out super cloudy. :-(   [End]
[retrieve this message]

---

Hi all, new to curezone, hoping to make it my one stop for all my eastern medicine questions and related. I recently just got done with a cystic fibrosis tuneup in the hospital in Denver. I was there for three weeks, my past few tuneups i have been going in and coming out with the same FEV1 or close. So i used the past three weeks in the hospital to research, study and purchase eastern medicines. From tinctures to chinese supplements proper dieting. Now the dieting i have not started yet, still working on the cookbook for it. Essential Oils i am already hardcore into. So i started the tinc ...
[retrieve this message]

---

Posting photos gives me brain fog. Trust me, my colloidal silver is crystal clear and the red laser is VERY hard to see in a lighted room. Just like this: https://www.youtube.com/watch?v=IYde8aK-9S4&feature=youtu.be&t=105 Not more than 1 or 2 sparkles to be seen. The Silvertron Elite measures the PPM precisely and it automatically shuts off at 20ppm for the silver I take internally, confirmed by the calibrated Hanna PWT Meter. I also make 30ppm for my Ultrasonic Humidifier used in my bedroom. The laser in 30ppm CS is easily seen in a lighted room, just like this, but a little l ...
[retrieve this message]

---

Could you possibly still post a picture of the Tyndall effect created by your Silvertron Elite, along with what the ppm is? I’m considering moving on from my SilverGen SG6. The Tyndall effect it produces is sometimes butter smooth w/o many reflective particles/specs, but most of the time it creates a very ”sparkly” Tyndall effect. Just doesn’t seem consistent, and I still don’t know what kind of Tyndall effect I am looking for in a properly made batch. I feel the buttery smooth Tyndall would be ideal, but I can’t seem to consistently replicate it.   [End]
[retrieve this message]

---

Hi guys, I am back after a long time without post at curezone forum. I just uploaded my new video showing how to produce golden colloidal silver following an advanced method with step-by-step instructions. It is much more detailed than my previous videos on the subject and was improved to cover the most frequent asked questions. It is hard to talk about a definitive guide for colloidal silver production, but it was made with that in mind. The video is available in two languages, but has been made to be as neutral as possible regarding language to be e ...
[retrieve this message]

---

If there is no available science research on the topic sometimes the DIY people become the science researchers themselves. But if we ignore good information we often confuse our understanding and the results are likewise confused. Most people in this CS endeavor were waylaid at an early stage of the story of CS, 15 to 20 years ago, by information which was fraudulent. These aspects to the CS subject were published in lay texts, had web sites created around them, and these erroneous, actual distracting for market share ”Red Herrings”(tho I think the author was just too full of themselve ...
[retrieve this message]

---

RE: Using electrolyte (non-toxic sodium carbonate and distilled water stops the silver plating to the cathode.  I’d like to touch on some points in your comment as it appears to confound the quality of a CS solution with processing methods. Though before I begin, I’d like to point out that while it is true that electrolyte will alter the plating characteristics in an electrolytic cell, that the cathode will plate nonetheless. Which you yourself can verify by using a copper cathode and observing the changes that take place throughout processing.  Beyond this I’d add that it h ...
[retrieve this message]

---

Agreed. The reason the SilverTron doesn’t have the polarity switching is that the designer knows what he’s doing when it comes to making silver. Using electrolyte (non-toxic sodium carbonate and distilled water stops the silver plating to the cathode. So on the basis that you’re ”making your silver the right way” you would never need to have polarity switching. ans in answer to your question on cleaning a bullion.........Hold it in some pliers and hold over a gas stove burner until the bullion burns off back to white. Heat it enough until the flames coming off have a slight red glow. T ...
[retrieve this message]

---

What is the latest on your SG6? Your motor was clearly defective. See these 2 videos of the SG6: Video Review Pt 1 - https://www.youtube.com/watch?v=0Zmgku2oQvk Video Review Pt 2 - https://www.youtube.com/watch?v=sz042F6Ggl8 Also heads up, a new SG6 review is being done here, maybe you can add some valuable info: http://www.curezone.org/forums/fm.asp?i=2339053#i Grizz   [End]
[retrieve this message]

---

Yes. DMSO- supreme tissue passing transporter and bonifide excellent free radical scavenger, so it’s a great addition (I really like it w Tincture of Cayenne).   [End]
[retrieve this message]

---

Has anyone tried this protocol? It seems that it helps many chronic conditions. I tried to post a link to this protocol which includes pairing the colloidal silver with MSM, but I was denied.   [End]
[retrieve this message]

---

I am using an aquarium bubbler to stir my water. That is what Steve Barwick uses on his Silver Edge Generator, so that is good enough for me. It also works with great results. Anyone who is against an air pump for stirring water is talking nonsense. Grizz   [End]
[retrieve this message]

---

I do not think that diodes in series would alter things because the current would be the same if the diodes were identical which even for the exact same diode will probably not be precisely the same. But it should not make a big difference. Parallel diodes I do not know. BTW I found a 1mA CRD on ebay and the seller ships world wide. The diode current regulation is only +-20% so not the tightest but as it’s only 0.8mA to 1.2mA max it should be okay. http://www.ebay.co.uk/itm/J505-Current-Regulator-Diode-1-0mA-/181163159905 The delivery to just about any country is less than doub ...
[retrieve this message]

---

Esstee, Excellent information on your current limiting diodes. I’ve updated my Home Generator references with your link. You are to be congratulated for discovering and promoting this approach for making colloidal silver. What happens if your diodes are wired in series? Or wired in parallel? Many thanks, Grizz   [End]
[retrieve this message]

---

RE: I do have a question. With your experience on diodes, will the same 1 milliamp diode work equally well with a 24 volt power supply as with a 48 volt supply? Will it still limit the current to 1 milliamp with either supply voltage? I would answer yes. I have pushed 1 mAh diodes as high as 60v without issue. Though I’d add that there are limits to what a diode can withstand in terms of total wattage(V x A). And so it’s important to outline this prior to experimentation. ie, as the conductivity of the cell increases, the voltage required to carry the amperage is reduced proporti ...
[retrieve this message]

---

Esstee, Excellent post and I agree with everything you say. I do have a question. With your experience on diodes, will the same 1 milliamp diode work equally well with a 24 volt power supply as with a 48 volt supply? Will it still limit the current to 1 milliamp with either supply voltage? However I do take issue with this statement: ”Though from what I can see, the problem of the constant voltage across the electrodes appears to remain.” The voltage as measured across the electrodes does in fact change when using resistors or a potentiometer, and can easily be proven with a ...
[retrieve this message]

---

While I would agree with the use of the diagram and electrochemistry information likely being overkill for most homebrewers. I would, however, add that these are the reasons why I’ve come to appreciate the use and simplicity of current limiting diodes. Granted, they are not perfect in that the current is fixed, though it does, however, solve the issue of voltage drop, by making very quick work of regulating current. ie, it has come to my attention that most simple DYI setups will run at/or around the 1 mAh mark. Which in turn, leads to a 1 mAh current limiting diode as being most often ...
[retrieve this message]

---

Your beautiful diagram and link is better served to a professional colloidal silver company in the business of making colloidal silver. For the rest of us, all of that complexity is not needed to produce simple pure Ionic Silver. All of the personal colloidal silver generators work in a similar way to produce ionic silver, listed here: http://tinyurl.com/silver-generators There are no electrolytes, heating or chemicals involved in making pure ionic silver. Also the voltage across the electrodes is expected to slowly go down as parts per million slowly builds up in the liquid. ...
[retrieve this message]

---

Hi Grizz, I would add that while the idea of using resistance to control current is not new, that the use of a potentiometer(variable resistor) does help avoid some of the pitfalls that come with fixed resistors.That said, the downside to using resistors, however, is where these affect the voltage across the electrodes as this would enter the prerequisites of the electrochemical production of CS - see: Electrolysis and the electrochemical series Therefore, and with that in mind, an ideal circumstance would be to use a constant current source so as to maintain voltage throu ... [Image Embedded Here]
[retrieve this message]

---

I have just added a new paragraph to our Silver Generator Reviews, ”Make Your Own Generator” This is a really great design for a home made generator because: 1) Puts YOU in control of current in milliamps 2) Puts YOU in control of PPM. ( more time = higher ppm) No more Pigs in a Poke with secret production current seen on commercial generators. More details at the end of this report: http://tinyurl.com/silver-generators This video details how to make a current controlled generator generator using a potentiometer instead of a current limiting diode. https://www.youtube.com/wat ...
[retrieve this message]

---

Seriously, If I were you I would build my own generator to make a quality Ionic Silver generator. See details in my file on generators, Make Your Own. https://docs.google.com/document/d/1E0JU4pU9sjNc91_4iZ5oThNsr6b9LkqtnU0X9MsavJg/edit# If you can’t order current limiting diodes (2 milliamp) then just put a potentiometer in series with your anode to limit current to 2 milliamps and use any old 24 to 36 volt power supply. If you insist on reducing ionic to perticle, the instructions are in that file also. Particle silver being superior to ionic silver because of stomach aci ...
[retrieve this message]

---

Unfortunately I waited for too long and he has raised his prices just like you said grizz and how he has REALLY raised his prices. He has more than doubled the price! I think that he seriously overestimates the value. It now sells for $645 in the UK 8-( It would cost me £500 to import that which is not going to happen, not this millennium. That is up from just above the £200 mark a few weeks back. That makes it one of the most if not THE most expensive home CS generators available. I do not see him selling many at that price. He will have to re-price it before he can sell any more at any w ...
[retrieve this message]

---

Besides knowing that ionic silver, is the atomic structure that kills pathogens, and that the non ionic aka elemental cannot, it is important to realize that, yes, the grouping size of the atoms made by the systems is important because the research, and common sense, shows that the smaller the group size, the more possibilities to kill. DQ used the analogy of a billiard balls vs BBs or something like that in a post last year or so. Each CS machine, due to what current and voltage used, and their relationship (less is better) makes a general size. Only two companies have published T ...
[retrieve this message]

---

Very nice explanation! Thanks. So all this business about particle size is a non issue because ions are all nano sized in any case. I guess the original SilverGen was all I needed. Auto shutoff, constant current, polarity reversing, PPM selector, water testing, and never a yellow batch. Just supply the distilled water and mason jars.   [End]
[retrieve this message]

---

I suggest keeping it simple. ALL home generators work in exactly the same way. You put 2 silver wires into a bottle filled with distilled water. You then apply a voltage potential across the silver electrodes. A current through the water begins flowing and strips silver ions off the silver wires. These are silver particles that are missing an electron. As the number of ions build up in the water, the current flowing through the water increases. It keeps increasing until the current limit happens. Of course as the current increases and the ions in the water keeps increasing, the vol ...
[retrieve this message]

---

Yes it’s hard to penetrate this wacky science. But I’ve read from the majority of sources that ionic silver doesn’t consist of particles but is more like electrolysis. Anywere from 1%-15% of the batch is actual colloidal silver also generated in the process.   Dunno. Then again some say it’s not really colloidal silver but agglomerated ionic silver - that’s almost completely ineffective once it enters the body. Dunno. When people say PPM they’re referring to parts per million not particles per million. Parts of what? Dunno.   [End]
[retrieve this message]

---

You are being confused by the Marketing BS, Lies & Confusion that will drive Dr. Phil insane. Just disregard anything those lying bast*rds have to say about ”Real” colloidal silver and their ”silver particles.” Also disregard anything said about adding chemicals of any kind to our ionic silver. It is all BS pure & simple. http://www.thesilveredge.com/metalloproteins.shtml ”Ionic silver are not complete atoms of silver and therefore are not silver particles.” Again the marketing BS is adding gross confusion. The silver particle (atom) consists of 47 protons & 61 Neutrons in the ...
[retrieve this message]

---

Ions are atoms in scientific usage.(maybe not in some peoples minds but---) And particle or particulate is a general noun not a proper noun and has no reference to size except when clarified by specific size modeling terms.   [End]
[retrieve this message]

---

"The correct question is how much of the solution is Ionic (AG+) or simply particles with no charge (AG)." Ionic silver are not complete atoms of silver and therefore are not silver particles. The 1% to 10% of colloidal particles in the mix are the only effective particles. "I’ve also read that binding ionic silver into particulate clumps isn’t the same as Colloidal Silver particles - and less effective because of the charge." >>> This only happens when you run too much current through the solution, causing large silver clumps to break off of y ...
[retrieve this message]

---

Mr.Cuddly, Grizz - ?? what percent of your mix are particles? ALL Silver particles either have a Positive Charge (AG+) or NO Charge (AG) or a Negative Charge (AG-). So 100% of my solution are particles. The correct question is how much of the solution is Ionic (AG+) or simply particles with no charge (AG).So the answer is that all of my solution is Ionic (AG+). This is because the solution is clear and where the laser beam can hardly be seen in a dark room. ?? Do you (or anyone else) know what the best way to minimize particle size is if you’re heating or using a reducing agen ...
[retrieve this message]

---

Grizz - what percent of your mix are particles? Do you (or anyone else) know what the best way to minimize particle size is if you’re heating or using a reducing agent to make colloidal silver? I’ve also read that binding ionic silver into particulate clumps isn’t the same as colloidal silver particles - and less effective because of the charge. Hard to navigate all the claims without a masters in biology and chemistry!!   [End]
[retrieve this message]

---

BrightSide, Based on what we know today, I attribute the success of Mesosilver (Particle Silver) to the ionic silver component. Every brand of silver contains both ionic and particles. Some like Mesosilver is mostly particle and others such as Sovereign silver are mostly ionic. See this link for details: http://www.thesilveredge.com/ionicvspart.shtml#.V7NQ57v6tT0 I will soon be comparing Ionic Silver results to Mesosilver results, and will be giving my report, hopefully before March 2017. Best to you, Grizz   [End]
[retrieve this message]

---

New member I want to thank Grizz for introducing me to this forum   [End]
[retrieve this message]

---

  [End]
[retrieve this message]

---

Esstee, Here is the answer I found for your astounding testimonial: ”With or without the HCl (stomach acid) mixture added, the Staphylococcus cultures (both S-1 and S-2) on the plates were virtually eradicated in just four minutes when treated with ionic silver. But the culture plates treated with the so-called “true colloid” particulate silver showed only a slight reduction in the bacterial count! ..... Laboratory tests conducted since that time have demonstrated that the ionic form of colloidal silver is up to 10,000 times more effective than the particulate form. ” http://www.thesi ...
[retrieve this message]

---

Vairagi, I have found the missing link ! ================================== THIS explains why 16 ozs a day Mesosilver Particle Silver was useless for Esstee’s infection and why only 2ozs a day of ionic was a success. Valid research cannot be disputed. Steve Barwick once again to our rescue. =================================== ”Below I will quote directly from an article titled ”Comparative Analysis Study Shows Ionic Silver to Be Up to 10,000 Times More Effective Than Particulate Colloidal Silver: the End of the Great Particulate vs. Ionic Silver Debate,” written by former U.S. Arm ...
[retrieve this message]

---

ok thanks. I wonder how this happened. Oh well nothing to be done now. I don’t have access to those things and will just used bought CS until I can do something else.   [End]
[retrieve this message]

---

It won’t hurt your pets, but it also won’t help them. Silver Mud has silver particles for too big to be helpful. You can fix it by installing a 2 Milliamp current limiting diode in series with the Anode (+) wire. See details for this diode in ”Make Your Own Generator” here: http://tinyurl.com/silver-generators Grizz   [End]
[retrieve this message]

---

Well it just started doing this the last few months. Maybe it is time to change. Is this dangerous for my cats? I did not see the puppy there when I went to the website. I bought mine 5 years or so ago I guess   [End]
[retrieve this message]

---

I suggest you build your own. It is absurdly simple and will make high quality ionic silver if you use a 2 milliamp current control diode. Details at the end of this report: https://docs.google.com/document/d/1E0JU4pU9sjNc91_4iZ5oThNsr6b9LkqtnU0X9MsavJg/edit# Grizz   [End]
[retrieve this message]

---

I will give you credit as the author and leave your links exactly as you have them. I like you just want to put the info out there. I have 400,000 followers on Twitter and 5 pages on FB and so will do my best to give the info. I feel so stupid when I read here as I thought I knew about CS but I sure don’t. I looked up your generator you suggest but they do not ship to Jordan. Interesting gadget.   [End]
[retrieve this message]

---

I can answer that question for you. Your silver is turning dark because it generates too much current, and thereby creates Silver MUD which is extremely large particles of silver. It is doing this because there is no current control going to the electrodes. A quality generator MUST limit current to the electrodes to prevent making Silver MUD, Preferably the current should be limited to not more than 2 milliamps. Just my opinion as I’m sure I will get some Flak over this. I prefer to take longer to generate silver to insure tiny particle size. I don’t think they make the Pocket Si ...
[retrieve this message]

---

Yes, please do use my file to write articles. You are right, I could write an E-Book, but that would defeat my purpose of getting EVERYONE on Planet Earth trained to use colloidal silver. Please reference the links to my files in your articles. We need to do everything we can to get the word out to everyone, Grizz   [End]
[retrieve this message]

---

I bought the pocket Silver Puppy years ago when nothing would help my cat Baby. It served its purpose and was a beginner generator but now it is in need of help. When contacting the owner multiple times on why my CS is turning dark he refuses to answer. As you know customer service is so important. He shipped it to Jordan for me and that was good but told me not to buy any extras to measure the CS and I wonder why now. So would I buy or recommend this to anyone? NO.   [End]
[retrieve this message]

---

Thanks I will check it out. I feed my cats CS daily and so it is important to me. Have you ever thought of putting your info in a ebook? You have so much information and so valuable to everyone. I know you tell everyone to share this. Do you mind if I write an article with your info?   [End]
[retrieve this message]

---