Re: I've built my own single 9V dc beck's blood cleaner

Ok my friend, my resistors were in parallel as i just connected them as it is on the drawing, so i will change that so as if they were connected like 1 resistor together.

i will also change the 1uf cap to a 0.1uf cap, this will be done within a few hours.

i have tested at the schottkeys and results are as follows,

from top to bottom (the line is facing the right hand side)

1)5.23v
2)3.37v
3)0v
4)3.43v
5)5.36v
6)3.44v

silver jack plug) 1.2v
silver lamp) 0v

zapper jack plug) 0v

i find these readings quite peculiar, i assume that number three is not working correct and i will change that 1 only.

we ill get there in the end lol.

Let me know what u think.

G

Tweet