Re: I've built my own single 9V dc beck's blood cleaner (Dr. Bob Beck Forum ) 7/25/2009 1462413

CureZone Log On Join

Re: I've built my own single 9V dc beck's blood cleaner

Dr. Bob Beck Forum

Wormwood Capsules, Clove Tincture
Hulda Clark Parasite Cleanse

Wormwood Capsules, Clove Tincture
Hulda Clark Parasite Cleanse

gozoo1 Views: 71,534
Published: 16 y

This is a reply to # 1,462,367

Re: I've built my own single 9V dc beck's blood cleaner

Advertisement
Clarkia Extra Strong
Clarkia Tincture 2 oz, 4 oz, 8 oz, and 16 oz

Ok great advice, i have checked the voltage at the jack leads, its zero, at the taper pot the voltage is 27 volts, also the voltage at the test switch is 25 volts, i have checked the polarity on the diodes and capacitors and they appeaer to be ok by the eye, i am working to a different schematic to the 1 that you showed me, mine is much older version.

http://www.teslatech.com/

This page above is the schematic i have using and as far as i know its supposed to work as its the original 1. what would you advise as the next step, i really appreciate this, sorry i did not get back sooner but its 5am here and now i am wide away and working on it, what do you need to know next?

G

All of my messges on this board All of my messges anywhere

Advertisement
Lugol’s Iodine Free S&H
J.Crow’s® Lugol’s Iodine Solution. Restore lost reserves.

More

Add To Favorites!

Alert Moderators

Report Spam or bad message

Alert Moderators on This GOOD Message

This Forum message belongs to a larger discussion thread. See the complete thread below. You can reply to this message!

Expand the next 20 of 98 messages

I've built my own single 9V dc beck's blood cleane... R Gill Grabber 16 y 106,177 † C †
- Good idea. You can almost find out anything you wa... Johny Apple Bomb 16 y 72,641
- Awesome! Now if only we could design a circuit to... Exploited Citizen 16 y 72,503
  - Someone already did do just that. Check out this l... Gill Grabber 16 y 72,858
    - I finally got my blood electrifier working. Thanks... mvickers 15 y 66,812
      - Perhaps you could consider this simple home build ... Gill Grabber 15 y 67,562
        
        also used the Capacitors 6X5mm 35V 22 that was in ... mvickers 15 y 66,343
        
        The 35V 22uF CAP is I believe the original part li... Gill Grabber 15 y 66,555
- Bravo!!! That’s the way to go! Now, a video on ho... truecolor 16 y 71,880
  - Now you really don’t want to hear all the cussing ... Gill Grabber 16 y 71,934
- Well I finally got a smaller enclosure with remova... Gill Grabber 16 y 72,550
  - I was asked about the parts list for the step up c... Gill Grabber 16 y 73,325
  - Can anyone help me, i have been making my own beck... gozoo1 16 y 71,725
    - take a picture(s) of your circuit and jumpers to l... Gill Grabber 16 y 71,699
      - please help me, i have been making my own becks el... gozoo1 16 y 71,419
      - please can you help, i hsve been working on this f... gozoo1 16 y 71,357
        
        Ok I see, check how you have wired the 3.5 mm jack... Gill Grabber 16 y 72,048
      - also that capacitor is 35 volts 220uf and it shoul... gozoo1 16 y 71,646
    - have you measured output from your electrodes? is ... Gill Grabber 16 y 71,681
      - Ok great advice, i have checked the voltage at the... gozoo1 16 y 71,534
        This is the position of the above message within the thread.
      - Expand the next 20 of 98 messages
        
        i just realised that the big capacitor , the 1 tha... gozoo1 16 y 72,103
        
        ”i just realised that the big capacitor , the 1 th... Gill Grabber 16 y 71,938
        
        ok i will change cap in a few hours when the shops... gozoo1 16 y 71,302
        
        ”Maybe its the relay because when i turn down the ... Gill Grabber 16 y 71,355
        
        right ok i think i got my head around all of that ... gozoo1 16 y 71,527
        
        You can make all 10uF caps to be 50V rated that wi... Gill Grabber 16 y 71,453
        
        i can only find 2.3 meg ohm o.6 watt 5% resistor i... gozoo1 16 y 71,397
        
        ”i can only find 2.3 meg ohm o.6 watt 5% resistor ... Gill Grabber 16 y 71,520
        
        is that component diagram that you put on this las... gozoo1 16 y 71,333
        
        can i blow a capacitor by holding the soldering ir... gozoo1 16 y 71,330
        
        ”can i blow a capacitor by holding the soldering i... Gill Grabber 16 y 71,208
        
        Great advice thank u i will use that, I still d... gozoo1 16 y 71,290
        
        Hi again and sorry to bother u, I have connecte... gozoo1 16 y 71,416
        
        Q: ”I still dont quite get it with the diodes at t... R Gill Grabber 16 y 71,726
        
        Ok my friend, my resistors were in parallel as i j... gozoo1 16 y 71,037
        
        my 0.1 uf cap will be an electrolytic cap, as that... gozoo1 16 y 71,095
        
        Q: ”my 0.1 uf cap will be an electrolytic cap, as ... Gill Grabber 16 y 71,542
        
        Q: from pin 8 on 7660 go up to second rectifier - ... gozoo1 16 y 73,209
        
        Q: I have made the changes i said before with the ... Gill Grabber 16 y 72,371
        
        Hey Gill Ive checked everything again and again... gozoo1 16 y 71,227
        
        Expand the next 20 of 98 messages
        
        This is really weird, everytime i test the circuit... gozoo1 16 y 71,857
        
        Ive checked everything again and again, changed ... Gill Grabber 16 y 71,165
        
        Ok I have tested at the CS jack, there was no con... gozoo1 16 y 71,070
        
        ”I have tested at the CS jack, there was no contin... Gill Grabber 16 y 71,412
        
        I was reviewing your build again and I have notice... Gill Grabber 15 y 66,712
        
        I am trying to understand your work, but i have no... gozoo1 16 y 71,033
        
        Q: ”I am trying to understand your work, but i hav... Gill Grabber 16 y 71,089
        
        I wondered if you have a really easy to make compo... gozoo1 16 y 71,383
        
        I just updated the picture and the excel file to i... Gill Grabber 16 y 71,499
        
        on yours it does not say if the led is bicolor or ... gozoo1 16 y 71,299
        
        1 more thing i wanted to ask is about the switch, ... gozoo1 16 y 71,158
        
        1 more thing is that you havnt said what percentag... gozoo1 16 y 71,170
        
        the polarity of only 1 of the capacitors is stated... gozoo1 16 y 71,323
        
        i assume they are electrolytic capacitors and norm... gozoo1 16 y 71,088
    - Check your ouput frequency it is probably to high! kscmac 12 y 47,053
  - Hey Gill. Just wondering about the blood electrifi... mvickers 15 y 65,810
    - It is 33 Volts regulated only with 150 ohm resisto... Gill Grabber 15 y 66,076
- I really appreciate the pictures to help me concep... winterwhspr 16 y 71,497
  - Here is a part list for complete back device at h... Gill Grabber 16 y 72,687
    - Hello Gill Grabber, I have ordered the parts to... taloch 16 y 71,091
      - Expand the next 20 of 98 messages
        
        Q: ”Can you tell me if yours is a Bi-Phasic design... Gill Grabber 16 y 72,862
        
        Thanks for the reply Gill, Those amazing guys a... taloch 16 y 71,048
        
        ”Those amazing guys at Mouser Electronics! I order... Gill Grabber 16 y 71,010
        
        i have not failed until i stop trying, however its... gozoo1 16 y 71,084
        
        Hi Gill, The car got fixed and all faults clear... taloch 16 y 70,970
        
        ”started on your single 9V dc beck’s blood cleaner... Gill Grabber 16 y 71,097
        
        You’re an angel. I am saving your diagram and if ... LoricaLady 16 y 71,010
        
        this second one is connecting to the 22uF capacito... Gill Grabber 16 y 71,283
- Hi Gill nice job. Do you make these available? curezzz 16 y 70,386
  - No, I do not. My house is under construction and I... Gill Grabber 16 y 70,766
- Thanks for your work and explanations Gill. I’ve r... Damzie 15 y 67,674
  - According to Beck’s diagram it calls for 6-12V 55m... Gill Grabber 15 y 67,697
    - Thanks for the clarification. This is my first ele... Damzie 15 y 67,539
      - Mouser #: 140-L35V22-RC Mfr. #: 140-L35V22-RC De... Gill Grabber 15 y 67,802
      - ”Mouser #: 140-L35V22-RC Mfr. #: 140-L35V22-RC D... Gill Grabber 15 y 66,905
        
        I left out the resistor in the top left of the dia... mvickers 15 y 66,241
        
        The 150 ohm resistor is to protect the circuit and... Gill Grabber 15 y 66,538
        
        craziest thing. I get the 150 resistor in and sold... mvickers 15 y 66,153
        
        Try to put your leads in to regular tap water or w... Gill Grabber 15 y 66,150
        
        Well I have been making CS for a while now. Still ... mvickers 15 y 65,535
        
        Expand the next 18 of 98 messages
        
        Q: Well I have been making CS for a while now. St... Gill Grabber 15 y 66,375
        
        Thanks for the info, Gill. I use 2 silver maple le... mvickers 15 y 65,675
        
        Surface Area of Cylinders. To find the su... Gill Grabber 15 y 65,881
- Dear Gill ! I only want to say ”thank you very ... cvrcac 15 y 66,429
  - This my DIY device, based on Gill schematics: h... calzone 15 y 68,233
    - Job well done. Really nice looking unit and whole... Gill Grabber 15 y 66,006
    - Hi Calzone, am not sure if you received my message... picoranton 11 y 42,867
- Hi Gill Thank you so much for posting this grea... motiv8d 14 y 64,504
- 513-nju7660d Thank You again for your sharing... Gill Grabber 14 y 62,977
  - Circuit and PCB for single 9V dc beck’s blood clea... kostasf 13 y 57,483
- Thank you very much for sharing the schematics. Wh... dogue2000 13 y 59,487
- Gill Grabber.....I have no word to thank you....ju... Dejen 13 y 56,852
- Hi Gill, after studying your tutorial on the blood... Bob Beck Believer 13 y 55,180
  - Does anybody have any issues with the 33VDC going ... kscmac 12 y 52,844
- I’m sorry if this sounds like a basic electronic q... 1722njrf 13 y 53,574
- can i get the explanation overall how the circuit ... fariss 12 y 47,362
- I’m sorry if this sounds like a basic electronic q... fariss 12 y 47,155
- Hi Gill, thanks for ur info here, im struggling to... seanw 11 y 39,080

Donate to CureZone

CureZone Newsletter is distributed in partnership with https://www.netatlantic.com

Contact Us - Advertise - Stats

Copyright 1999 - 2025 www.curezone.org

0.594 sec, (1)