Re: I've built my own single 9V dc beck's blood cleaner (Dr. Bob Beck Forum ) 7/25/2009 1462318

Re: I've built my own single 9V dc beck's blood cleaner

Original Dr. Hulda Clark
Hulda Clark Cleanses

Lower Cholesterol
Cleanse the body of fat

Original Dr. Hulda Clark
Hulda Clark Cleanses

Lower Cholesterol
Cleanse the body of fat

gozoo1 Views: 71,305
Published: 15 y

This is a reply to # 1,462,301

Re: I've built my own single 9V dc beck's blood cleaner

Advertisement
Epsom Salt Encapsulated
Hulda Clark Cleanse Kits

please help me, i have been making my own becks electrifier, its took me ages, 3 days, but i cant seem to get it right, i built in from start to finish on a blank board, the bulb lights when i turn it on but then when i press the test button the LED's are supposed to flash alternatively but they only both stay lit on ,no flashing, can anybody help me as i am really trying my hardest and i really need this to work ASAP. its the 1 with 3 batteries by the way.

Gozoo

All of my messges on this board All of my messges anywhere

Add To Favorites!

Like Dislike

Alert Moderators

DISCLAIMER

This Forum message belongs to a larger discussion thread. See the complete thread below. You can reply to this message!

Expand the next 20 of 98 messages

I've built my own single 9V dc beck's blood cleane... R Gill Grabber 15 y 106,017 † C †
- Good idea. You can almost find out anything you wa... Johny Apple Bomb 15 y 72,529
- Awesome! Now if only we could design a circuit to... Exploited Citizen 15 y 72,392
  - Someone already did do just that. Check out this l... Gill Grabber 15 y 72,744
    - I finally got my blood electrifier working. Thanks... mvickers 14 y 66,693
      - Perhaps you could consider this simple home build ... Gill Grabber 14 y 67,413
        
        also used the Capacitors 6X5mm 35V 22 that was in ... mvickers 14 y 66,232
        
        The 35V 22uF CAP is I believe the original part li... Gill Grabber 14 y 66,449
- Bravo!!! That’s the way to go! Now, a video on ho... truecolor 15 y 71,770
  - Now you really don’t want to hear all the cussing ... Gill Grabber 15 y 71,825
- Well I finally got a smaller enclosure with remova... Gill Grabber 15 y 72,438
  - I was asked about the parts list for the step up c... Gill Grabber 15 y 73,215
  - Can anyone help me, i have been making my own beck... gozoo1 15 y 71,615
    - take a picture(s) of your circuit and jumpers to l... Gill Grabber 15 y 71,592
      - please help me, i have been making my own becks el... gozoo1 15 y 71,305
        This is the position of the above message within the thread.
      - please can you help, i hsve been working on this f... gozoo1 15 y 71,251
        
        Ok I see, check how you have wired the 3.5 mm jack... Gill Grabber 15 y 71,935
      - also that capacitor is 35 volts 220uf and it shoul... gozoo1 15 y 71,533
    - have you measured output from your electrodes? is ... Gill Grabber 15 y 71,572
      - Ok great advice, i have checked the voltage at the... gozoo1 15 y 71,431
      - Expand the next 20 of 98 messages
        
        i just realised that the big capacitor , the 1 tha... gozoo1 15 y 71,996
        
        ”i just realised that the big capacitor , the 1 th... Gill Grabber 15 y 71,836
        
        ok i will change cap in a few hours when the shops... gozoo1 15 y 71,190
        
        ”Maybe its the relay because when i turn down the ... Gill Grabber 15 y 71,252
        
        right ok i think i got my head around all of that ... gozoo1 15 y 71,419
        
        You can make all 10uF caps to be 50V rated that wi... Gill Grabber 15 y 71,341
        
        i can only find 2.3 meg ohm o.6 watt 5% resistor i... gozoo1 15 y 71,285
        
        ”i can only find 2.3 meg ohm o.6 watt 5% resistor ... Gill Grabber 15 y 71,406
        
        is that component diagram that you put on this las... gozoo1 15 y 71,226
        
        can i blow a capacitor by holding the soldering ir... gozoo1 15 y 71,218
        
        ”can i blow a capacitor by holding the soldering i... Gill Grabber 15 y 71,098
        
        Great advice thank u i will use that, I still d... gozoo1 15 y 71,186
        
        Hi again and sorry to bother u, I have connecte... gozoo1 15 y 71,306
        
        Q: ”I still dont quite get it with the diodes at t... R Gill Grabber 15 y 71,624
        
        Ok my friend, my resistors were in parallel as i j... gozoo1 15 y 70,925
        
        my 0.1 uf cap will be an electrolytic cap, as that... gozoo1 15 y 70,982
        
        Q: ”my 0.1 uf cap will be an electrolytic cap, as ... Gill Grabber 15 y 71,432
        
        Q: from pin 8 on 7660 go up to second rectifier - ... gozoo1 15 y 73,100
        
        Q: I have made the changes i said before with the ... Gill Grabber 15 y 72,253
        
        Hey Gill Ive checked everything again and again... gozoo1 15 y 71,122
        
        Expand the next 20 of 98 messages
        
        This is really weird, everytime i test the circuit... gozoo1 15 y 71,740
        
        Ive checked everything again and again, changed ... Gill Grabber 15 y 71,049
        
        Ok I have tested at the CS jack, there was no con... gozoo1 15 y 70,948
        
        ”I have tested at the CS jack, there was no contin... Gill Grabber 15 y 71,300
        
        I was reviewing your build again and I have notice... Gill Grabber 14 y 66,607
        
        I am trying to understand your work, but i have no... gozoo1 15 y 70,925
        
        Q: ”I am trying to understand your work, but i hav... Gill Grabber 15 y 70,961
        
        I wondered if you have a really easy to make compo... gozoo1 15 y 71,270
        
        I just updated the picture and the excel file to i... Gill Grabber 15 y 71,391
        
        on yours it does not say if the led is bicolor or ... gozoo1 15 y 71,183
        
        1 more thing i wanted to ask is about the switch, ... gozoo1 15 y 71,045
        
        1 more thing is that you havnt said what percentag... gozoo1 15 y 71,058
        
        the polarity of only 1 of the capacitors is stated... gozoo1 15 y 71,212
        
        i assume they are electrolytic capacitors and norm... gozoo1 15 y 70,979
    - Check your ouput frequency it is probably to high! kscmac 11 y 46,935
  - Hey Gill. Just wondering about the blood electrifi... mvickers 14 y 65,696
    - It is 33 Volts regulated only with 150 ohm resisto... Gill Grabber 14 y 65,966
- I really appreciate the pictures to help me concep... winterwhspr 15 y 71,379
  - Here is a part list for complete back device at h... Gill Grabber 15 y 72,579
    - Hello Gill Grabber, I have ordered the parts to... taloch 15 y 70,985
      - Expand the next 20 of 98 messages
        
        Q: ”Can you tell me if yours is a Bi-Phasic design... Gill Grabber 15 y 72,750
        
        Thanks for the reply Gill, Those amazing guys a... taloch 15 y 70,942
        
        ”Those amazing guys at Mouser Electronics! I order... Gill Grabber 15 y 70,902
        
        i have not failed until i stop trying, however its... gozoo1 15 y 70,974
        
        Hi Gill, The car got fixed and all faults clear... taloch 15 y 70,863
        
        ”started on your single 9V dc beck’s blood cleaner... Gill Grabber 15 y 70,984
        
        You’re an angel. I am saving your diagram and if ... LoricaLady 15 y 70,896
        
        this second one is connecting to the 22uF capacito... Gill Grabber 15 y 71,159
- Hi Gill nice job. Do you make these available? curezzz 15 y 70,273
  - No, I do not. My house is under construction and I... Gill Grabber 15 y 70,653
- Thanks for your work and explanations Gill. I’ve r... Damzie 14 y 67,567
  - According to Beck’s diagram it calls for 6-12V 55m... Gill Grabber 14 y 67,594
    - Thanks for the clarification. This is my first ele... Damzie 14 y 67,432
      - Mouser #: 140-L35V22-RC Mfr. #: 140-L35V22-RC De... Gill Grabber 14 y 67,696
      - ”Mouser #: 140-L35V22-RC Mfr. #: 140-L35V22-RC D... Gill Grabber 14 y 66,792
        
        I left out the resistor in the top left of the dia... mvickers 14 y 66,127
        
        The 150 ohm resistor is to protect the circuit and... Gill Grabber 14 y 66,428
        
        craziest thing. I get the 150 resistor in and sold... mvickers 14 y 66,042
        
        Try to put your leads in to regular tap water or w... Gill Grabber 14 y 66,038
        
        Well I have been making CS for a while now. Still ... mvickers 14 y 65,424
        
        Expand the next 18 of 98 messages
        
        Q: Well I have been making CS for a while now. St... Gill Grabber 14 y 66,236
        
        Thanks for the info, Gill. I use 2 silver maple le... mvickers 14 y 65,557
        
        Surface Area of Cylinders. To find the su... Gill Grabber 14 y 65,767
- Dear Gill ! I only want to say ”thank you very ... cvrcac 14 y 66,309
  - This my DIY device, based on Gill schematics: h... calzone 14 y 68,131
    - Job well done. Really nice looking unit and whole... Gill Grabber 14 y 65,896
    - Hi Calzone, am not sure if you received my message... picoranton 10 y 42,757
- Hi Gill Thank you so much for posting this grea... motiv8d 13 y 64,401
- 513-nju7660d Thank You again for your sharing... Gill Grabber 13 y 62,867
  - Circuit and PCB for single 9V dc beck’s blood clea... kostasf 12 y 57,377
- Thank you very much for sharing the schematics. Wh... dogue2000 12 y 59,376
- Gill Grabber.....I have no word to thank you....ju... Dejen 12 y 56,743
- Hi Gill, after studying your tutorial on the blood... Bob Beck Believer 12 y 55,067
  - Does anybody have any issues with the 33VDC going ... kscmac 11 y 52,732
- I’m sorry if this sounds like a basic electronic q... 1722njrf 12 y 53,448
- can i get the explanation overall how the circuit ... fariss 11 y 47,243
- I’m sorry if this sounds like a basic electronic q... fariss 11 y 47,045
- Hi Gill, thanks for ur info here, im struggling to... seanw 10 y 38,974

Donate to CureZone

CureZone Newsletter is distributed in partnership with https://www.netatlantic.com

Contact Us - Advertise - Stats

0.189 sec, (1)

Re: I've built my own single 9V dc beck's blood cleaner

This Forum message belongs to a larger discussion thread. See the complete thread below. You can reply to this message!

This is the position of the above message within the thread.