I've built my own single 9V dc beck's blood cleaner

This is my newly built Dr. Beck's Blood Cleaner / Electrifier device. I needed something portable, but was not ready to spend $200 for Sota device.
I was able to find step up circuit on the internet that allows 9 vdc single battery supply to be stepped up to 33 vdc.
Battery will be effective for about 60 hours of use at which point it should be replaced (sooner if you have well insulated skin, my skin is paper thin, so even 9vdc gives me good tingle)

Input voltage of 33V dc from single 9v dc battery. Fits small enclosures of 3.8x2.4x.9 inch. Portable to wear on the go.
I omitted power checking LED circuit as I can feel when the battery gets too low in power. I get fairly strong tingle all the way down to 9V dc.I personally cannot keep it on full power for too long.
The board size is still large enough to fit the 2 zener diodes and one 22uF capacitor and jumpers to LED for operation display. Mounting this LED on a small case is more of a challenge due to limited space in some enclosures.




Here is the link to step up circuit: http://www.geofex.com/circuits/+9_to_33.htm

I have made real component circuit diagram for my build for those who wish to replicate it. Here is the excel file:
//www.curezone.org/upload/Doc/single_9Vbeck_device2.xls



Please note: I have fixed this JPG file and all components and connections are correctly shown.






Gill

Here is a part list for complete back device at http://www.mouser.com

. Note there are 2 plastic enclosures listed here (only choose the one you want - the smaller enclosure will require drilling in to circuit board and will not have room for CS circuit, while the larger ones will not need any drilling and will allow for full beck device circuit and the 9V-33V step-up circuit. These 9v enclosures should come with 9v battery connector). I used awg 22 copper wire for jumpers and awg 22 stranded copper wire for electrodes leads (I make them long enough to snake from breast pocket down to my wrist under a shirt).
There will be drilling required on the face of the enclosure.
Happy building all.

link to circuit board at Radio Shack:
http://www.radioshack.com/product/index.jsp?productId=2102846


I have made real component circuit diagram for my build for those who wish to replicate it. Here is the excel file:
//www.curezone.org/upload/Doc/single_9Vbeck_device2.xls





Mouser #: 616-62669-510-000
Mfr. #: 62669-510-000 HML-9VB-PBC Black Kit
Desc.: Plastic Enclosures Kits-Black HML-9VB-PBC Black
RoHS: In Transition
Availability
1 Ships Now
$5.66 $5.66

Mouser #: 660-CFP1/4CT52R821J
Mfr. #: CFP1/4CT52R821J
Desc.: 1/4Watt Axial Leaded Carbon Film Resistors 820 ohm 5%
RoHS: RoHS Compliant
Availability
1 Ships Now
$0.05 $0.05

Mouser #: 660-CFS1/4CT52R104J
Mfr. #: CFS1/4CT52R104J
Desc.: 1/4Watt Axial Leaded Carbon Film Resistors 100K OHM 5% 1/4W
RoHS: RoHS Compliant
Availability
2 Ships Now
$0.05 $0.10

Mouser #: 660-CFS1/4CT52R154J
Mfr. #: CFS1/4CT52R154J
Desc.: 1/4Watt Axial Leaded Carbon Film Resistors 150K OHM 5% 1/4W
RoHS: RoHS Compliant
Availability
1 Ships Now
$0.05 $0.05

Mouser #: 291-2.4M-RC
Mfr. #: 291-2.4M-RC
Desc.: 1/4W 5% Carbon Film Resistors 2.4Mohms 0.05
RoHS: RoHS Compliant
Availability
1 Ships Now
$0.10 $0.10

Mouser #: 31CQ501-F
Mfr. #: RV170SF-10-15R1-B100K
Desc.: 17mm Carbon Potentiometers Linear 100K
RoHS: RoHS Compliant
Availability
1 Ships Now
$1.48 $1.48

Mouser #: 161-0125
Mfr. #: 161-0125
Desc.: Phone Jacks 2.5mm 2C PHONE BLK
RoHS: No
Availability
1 Ships Now
$0.49 $0.49

Mouser #: 16PJ137
Mfr. #: 16PJ137
Desc.: Phone Jacks PHONE 3.5mm MONO
RoHS: No
Info: View Additional Product Info
Availability
1 Ships Now
$0.29 $0.29

Mouser #: 844-1N5819
Mfr. #: 1N5819
Desc.: Schottky Rectifiers 1.0 Amp 40 Volt
RoHS: RoHS Compliant By Exemption
Availability
6 Ships Now
$0.10 $0.60

Mouser #: 171-PA3191-1-E
Mfr. #: 171-PA3191-1-E
Desc.: Phone Plugs PHONE 3.5MM MONO
RoHS: RoHS Compliant
Availability
1 Ships Now
$0.71 $0.71

Mouser #: 171-3304-EX
Mfr. #: 171-3304-EX
Desc.: Phone Plugs PHONE 2.5mm MONO
RoHS: RoHS Compliant By Exemption
Availability
1 Ships Now
$0.78 $0.78

Mouser #: 606-CM7219
Mfr. #: 7219
Desc.: Incandescent Base Wire Terminal 12V .06A
RoHS: RoHS Compliant
Availability
1 Ships Now
$0.35 $0.35

Mouser #: 80-C410C104K5R
Mfr. #: C410C104K5R5TA
Desc.: Conformally Coated Axial Ceramic Capacitors 50volts .1uF 10%
RoHS: RoHS Compliant By Exemption
Availability
1 Ships Now
$0.06 $0.06

Mouser #: 140-L50V10-RC
Mfr. #: 140-L50V10-RC
Desc.: Ultra Miniature Radial Electrolytic Capacitors 6X5mm 50V 10
RoHS: RoHS Compliant
Availability
2 Ships Now
$0.18 $0.36

Mouser #: 140-L35V10-RC
Mfr. #: 140-L35V10-RC
Desc.: Ultra Miniature Radial Electrolytic Capacitors 5X5mm 35V 10
RoHS: RoHS Compliant
Availability
2 Ships Now
$0.16 $0.32

Mouser #: 140-L25V10-RC
Mfr. #: 140-L25V10-RC
Desc.: Ultra Miniature Radial Electrolytic Capacitors 5X5mm 25V 10
RoHS: RoHS Compliant
Availability
2 Ships Now
$0.16 $0.32

Mouser #: 645-558-3001-001F
Mfr. #: 558-3001-001F
Desc.: LED Panel Mount .156in Snap In RED/GREEN DIFF
RoHS: RoHS Compliant
Info: View Additional Product Info
Availability
1 Ships Now
$0.79 $0.79

Mouser #: 140-L35V22-RC
Mfr. #: 140-L35V22-RC
Desc.: Ultra Miniature Radial Electrolytic Capacitors 6X5mm 35V 22
RoHS: RoHS Compliant
Availability
1 Ships Now
$0.18 $0.18

Mouser #: 78-1N5248B-TAP
Mfr. #: 1N5248B-TAP
Desc.: Zener Diodes 18 Volt 0.5W 5%
RoHS: RoHS Compliant By Exemption
Availability
2 Ships Now
$0.03 $0.06

Mouser #: 595-LM358P
Mfr. #: LM358P
Desc.: Amplifiers - Operational Dual Op Amp
RoHS: RoHS Compliant
Availability
1 Ships Now
$0.40 $0.40

Mouser #: 513-NJU#7660D
Mfr. #: NJU#7660D
Desc.: Converters and Converter Control Ics Voltage Converter
RoHS: RoHS Compliant
Info: View Additional Product Info
Availability
1 Ships Now
$0.51 $0.51

Mouser #: 616-61985-510-039
Mfr. #: 61985-510-039 HM-9VB Bone Kit
Desc.: Plastic Enclosures Kits KIT 2.4X3.8X1.0
RoHS: RoHS Compliant
Availability
1 Ships Now
$4.01 $4.01
For additional information on availability, click on the Mouser Part #.
MERCHANDISE TOTAL:

$21.51 (USD)

Well I finally got a smaller enclosure with removable battery cover. So the final case size is 3.8x2.4x.9 inches in size (about cigarette pack size or old audio cassette tape enclosure)




And here it is all closed up ready to go to work.



I have made real component circuit diagram for my build for those who wish to replicate it. Here is the excel file:
//www.curezone.org/upload/Doc/single_9Vbeck_device2.xls


Happy Zapping.

Gill Tweet