Re: Minimum time for applying a specific frequency

>- if I take the individual scriipt and run, it almost feels like 3 minutes per frequency is not enough

This is in agreement with my observaions under the microscope and is one reason that I used 3-1/2 minutes with ParaZapper MX. What I found was microbes would swell and become inactive but if the zapping was stopped before they actually exploded, they would recover after a while and swim off as if nothing had happened. It appears that they are stunned and do not exhibit their normal frequencies until a while after they recover. I have also noticed that some explode much quicker then others at any particular frequency which is why I feel that using multiple frequencies is very important.

>- when I come back and then run the longer scriipt there is less or nothing there…

Just curious, how much later are you running the longer script?

>- This leaves the question; does running the same frq longer simply put more bullets into an already dying critter?

Again, my observation is that if it is not completely destroyed, it can recover. The greater the destruction, the longer the recovery time.

>- I should also add that some of the scripts from RL use sweeps that spend no more than 10s per frequency.

Several years back, I tried a swept frequency zapper with poor results. It looks great on paper though.