Re: Rife info

Well, you would put a wire from the stereo amplifier to the computer that fits both computer and amplifier. I think it would propably go from the cd output on the amplifier. Then you would take a wire from the speaker output on the amplifier and put something on those wires that resembles handhelds, or if you have a zapper you can use those handles if they fit into the amplifier output so you have something to hold on to, or you can just hold on to the wires. Then you just download a frequency program of some kind from the internet and start working from there. You can also check with an amperemeter that it´s working correct and how much voltage and current it gives out.

But be aware, this is much stronger than zappers and you can easily hurt yourself if you are not careful, perhaps it´s strong enough to kill you even I don´t know. You have to start with the volume button on 0 and build up from there. With the ampere meter you can easily check how much voltage that corresponds to the volume, so you will know approximately how much volume=voltage you can put on (volume button on amplifier). Don´t put on too much in the beginning, it´s not suppose to hurt. You also have to think about NOT putting the handhelds together or your amplifier might shortcut and stop working and there goes those hard earned money :-). Remember the voltage can be dangerous if you are not careful and check the volume button.