Re: HELP! Time to replace the SilverGen..

MrCuddley,

If you are on a budget, you can make high quality CS with a simple 1.4 ma current regulating diode in series with the silver Anode (+) wire and 3-9 volt batteries in series. Any power supply DC voltage between 18 volts and 36 volts will work just fine.

See all of Esstee's brilliant design notes in "Make Your Own Generator" in our Colloidal Silver Resources:
http://tinyurl.com/Grizz-Silver

Amazon.Com has inexpensive 24 volt DC Power Cubes that you can also use, only $10.00
https://www.amazon.com/Universal-Slimline-Regulated-Switching-Adapter/dp/B01BH0QM3A/ref=sr_1_4?s=electronics&ie=UTF8&qid=1472823776&sr=1-4&keywords=DC+power+supply+24+volt

Amazon.Com also sells current regulator diodes:
https://www.amazon.com/Electronics-Salon-Vishay-Siliconix-Current-Regulator-Diode/dp/B017NKA7ZM/ref=sr_1_2?ie=UTF8&qid=1472824461&sr=8-2&keywords=current+regulator+diodes

Amazon.com also has Silver Wires:
https://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Delectronics&field-keywords=silver+rods&rh=n%3A172282%2Ck%3Asilver+rods&ajr=0
#10 Gauge is best.

So bottom line for less than $50 you can make unlimited high quality ionic silver for friends & family. Esstee is our HERO for his ground breaking research into Making Your Own Generator.

You might also want to order a laser pen and the Hanna PWT Meter with calibrating liquid to measure your water. Amazon.Com has rip-off prices for the meter, so order the meter direct from Hanna Instruments.

Grizz Tweet