Re: how does one make one of the BIG orgone thingies?

Hi! Good question.

It is my understanding that you only need one large quartz crystal even if the Orgone is going to be a large piece- but if I were making it, I would add either one large crystal with a point, or a few smaller ones. Same goes with the copper coil. It should be coiled in a clock-wise direction as in all the orgones you make of any size.


Be sure to use a metal or glass-- or cardboard mold. Plastic will melt from the chemicals in the resin or Bondo.

If I were you, i'd use an ugly old glass mixing bowl that you don't plan on using- and either crack it off after the Resin dries, or else get some of those aluminum mixing bowls--- the really large ones you could mix a giant Salad in, and spray it with WD-40 before pouring the liquid resin in it.

You can find these mixing bowls in the cooking section of KMart, Walmart , etc.- they often come as a set of different sizes.

I've seen large pyramid Orgones, so I would be interested in seeing what people use as a mold for those babies!