Making SSKI 
free09
14 y
8,722
Lugol’s Iodine Free S&H
J.Crow’s® Lugol’s Iodine Solution. Restore lost reserves.
New lower prices!
Hulda Clark Cleanses
Hi Everyone
I’ve been supplementing with Lugols Iodine for about a year now and have been having great results. After reading about SSKI , I have decided to switch to that, but since I live in the UK I’ll have to make it myself.
So I’ve ordered 100gms of Potassium Iodide 99.% USP ultra pure grade and distilled water. But after reading as much as I can, I’m still a bit confused about how to make it. From what I have gathered, all I have to do is measure out about 100ml of distilled water and keep adding the Potassium Iodide powder until the powder stops dissolving in the water. Is that right?
And if you’re using SSKI , do you have to supplement with Magnescent Iodine as well?
Any information you guys can give me will be much appreciated.
Thanks
More
-
Re: Making SSKI just thinking
14 y
8,641
Lugol’s Iodine Free S&H
J.Crow’s® Lugol’s Iodine Solution. Restore lost reserves.
Clarkia Extra Strong
Clarkia Tincture 2 oz, 4 oz, 8 oz, and 16 oz
This is a reply to # 1,711,062It can always be argued that a little elemental iodine added to SSKI is a good thing. Especially for females. Males? Maybe not so much, IMO. You know how you feel on Lugol's. After some time on SSKI, you may crave elemental because "something's missing." Or maybe not. You'll figure it out.
Seems like if you had exactly 100 ml distilled water, and exactly 100 g potassium iodide, that solution would deliver 1 g KI per ml water. Easy to dose if you use a syringe -- say, 0.4 ml = 400 mg potassium iodide. (EDIT -- I should write this on a blackboard 100 times till I get it -- the goal is 100 ml SOLUTION, as Trapper says below, which will take more than 100 ml distilled water. Maybe when I finally make some I'll stop making this mistake!)
If you like the idea of the fully saturated solution, here's Trapper's recipe --
http://www.curezone.com/forums/fm.asp?i=1680545#i
Re: IodiDe dose by trapper/kcmo 51 days 121
Subject: Re: IodiDe dose
Username: trapper/kcmo contact trapper/kcmo email trapper/kcmo
Date: 8/30/2010 2:09:17 PM ( 53 days ago )
Hits: 123
Size: 376 char. URL: http://www.curezone.com/forums/fm.asp?i=1680545
trapper/kcmosomeone advised on this earlier and pointed out that its a SATURATED solution of KI. you can take distilled water and keep adding KI to it until it no longer dissolves. that will give you SSKI as well. start with the bottle only a quarter full so you can shake it and so you dont overflow it. there is more KI in SSKI than water! use brown glass to protect from UV light.
More
- Re: Making SSKI trapper/kcmo
14 y
8,586
This is a reply to # 1,711,126yep, you put the KI in the bottle first. then add watter a little at a time until no more dissolves. that is a saturated solution.
put 100gm of KI in a 100ml bottle. add water and shake. add water up to the 100ml mark. then you have SSKI - 1 gram per ml of solution. its that easy.- Re: Making SSKI free09
14 y
9,105
Lugol’s Iodine Free S&H
J.Crow’s® Lugol’s Iodine Solution. Restore lost reserves.
Clarkia Extra Strong
Clarkia Tincture 2 oz, 4 oz, 8 oz, and 16 oz
This is a reply to # 1,711,176Hi guys.
Thanks for such quick responses, I really appreciate it. I can't wait for the KI powder to arrive so I can start supplementing with SSKI :-)
For those of you in the UK who are considering making SSKI , you can get Potassium Iodide powder on Ebay. The one I've ordered is USP grade from this seller.
http://cgi.ebay.co.uk/Potassium-Iodide-99-Pure-100gm-PI-100-/140368704237?pt=...
This is another ebayer who sells Potassium Iodide.
http://cgi.ebay.co.uk/General-Laboratory-Chemicals-Potassium-Iodide-100g-/350...
I emailed the second seller to ask what grade his Potassium Iodide is and this was his response:
Hi
Our potassium Iodide is mostly GRP grade, which I think is roughly the equivalent of USP but we do have some which is Analar, which is our equivalent to ACS. The detailed spec is:
Assay minimum 99.8%
Maximum limits of impurities:
Water insoluble 0.003%
Cl and Br 0.01%
Iodate 0.0002
Nitrogen 0.001%
phosphate 0.001%
sulphate 0.001%
As 0.00001%
Ba 0.001%
Ca 0.0006%
Cu 0.0002%
Fe 0.0002%
Pb 0.0002%
Mg 0.0005%
Na 0.03%
Iodine reducing substances 0.001%.
If this grade is suitable, just specify Analar when ordering. The price is the same.
- scuddlebutt3
Judging from his reply, the second seller's Analar KI is a higher grade and I wish I'd waited fror his response before I ordered the first.
If you're all wondering what I'm talking about in regards to the grades, here is a previous post from Trapper on the subject.
//www.curezone.org/forums/fm.asp?i=1533397#i
I hope you all have a good weekend.- Re: Making SSKI alkaliza
14 y
8,545
This is a reply to # 1,711,197Thanks for the UK links!
I'm in Sweden and this is too important for me to lose information in translation and shipping from USA to here is often outrageous.
And thanks to everyone else for the recipes! - Re: Making SSKI langleypark
8 y
4,443
Lugol’s Iodine Free S&H
J.Crow’s® Lugol’s Iodine Solution. Restore lost reserves.
New lower prices!
Hulda Clark Cleanses
This is a reply to # 1,711,197I'm very pleased to read your posts as I've been really unsure if the 10% Lugols Reagent grade I bought online is safe to ingest. I've been searching the internet,without any success,to find out what significance 0.00001% max of lead will have on my health when taken over a period of time.
Or does "0.00001% max" mean too little to worry about?
As a new user of Lugols (In just a few days I already notice I have more energy) I'd love to hear what others think about these specs, as it says on the label "For laboratory use only" but according to what I've read on here the specs appear to be as good as medical grade.
Lugols Iodine Reagent 10%
PB 0.00001% max
AS 0.00001% max
FE 0.0001% max
CL 0.0001% max
Thanks for all the Information.
- Re: Making SSKI alkaliza
14 y
8,545
- Re: Making SSKI Newport
14 y
8,438
This is a reply to # 1,711,176The Pharma guy that I used to get it from cooked it:
- 200gm KI
- 220 ml Distilled
- Cook to disolve then evaporate to 200ml
They used a beaker on a burner so you could easily see when it evaporated back down to near 200ml.
- Re: Making SSKI #139500
9 y
5,189
- Re: Making SSKI #139500
9 y
5,189
- Re: Making SSKI #139500
9 y
5,246
This is a reply to # 1,711,176Well, I put 100g KI in a mason jar and put 100ml of water in next so it's almost exactly the same as your recipe. I didn't add water "up to" the 100ml mark. No prob, same stuff.
I just made four 1oz bottles of SSKI for about $14.00 total. Not bad. I'm tired so I'll leave making Lugol's 5% for tomorrow. I already have an extra bottle of Lugol's and 2 bottles of Nascent Iodine in my fridge anyhow so no rush. I am kinda looking forward to making it just to LAUGH in the face of the sellers of this stuff. I paid $29 BUCKS for 1 OUNCE of Lugol's. I can make it myself for next to nothing.
How much potassium Iodide is in one drop of this SSKI ?...and give me a link where I can learn about good dosage recommendations.
Thanks Trapper!
- Re: Making SSKI free09
14 y
9,105
- Re: Making SSKI trapper/kcmo
14 y
8,586
-
