New Magnetic Pulser Manifestation (MPM2)

http://www.highpowermagneticpulser.com/

This is the latest evolution of the megamagpulser I introduced on the Zapper Forum and here I believe about 8 months ago. However, I have nothing to do with its design, I simply forwarded the info here from Robb Allan and give credit to Allan D. for "rediscovering" its initial design that created the spark. Again, Robb Allan is responsible for the design as well as contributos like jim meissmer,etc.

Although Robb Allan makes available this particular new one, you of course may build one yourself by using the old design notes and parts, buy the older style from robb allan..or THIS NEW ON I"M TALKING OF HERE, or figure out all the parts Robb is NOW using in this new design and build this one yourself.

Best to join the lyme and rife forum or robbs magnetic pulser forum. You need to join the forums I believe:

http://health.groups.yahoo.com/group/Magpulser/

Also posts are common about this device on the lyme and rife forum:

http://health.groups.yahoo.com/group/Lyme-and-rife/

Thr following are direct quotes from robb allan who built the new mpm2 and its former design on his website which he sells both here:

From: "Robb Allen"
Date: Tue Nov 16, 2004 10:12 pm
Subject: Re: [Lyme-and-rife] MPM2 Magnetic Pulser

Hi
It was believed by doug (of course using the doug device) that spirochetes were killed while rifing in the range of 20 to 30 hz. 1 hz is one pulse per second. 10 hz would be 10 pulses per second.....so on and so forth. I know that many folks do those frequencies with the doug and also with the emem. Both of those machines will do those frequencies however at much less power than what I am talking about........on the same note......the MPM2 is NOT a rife machine. It will however operate as one in that range. (but at 120 amps)
Check my website late tonight or tomorrow for the price.
The MPM2 is hugely different than the original.
1. it will do many times the work of the original with no moving parts to wear out.
2. The pulse generator will NOT overheat.
3. The coil won't overheat because we are able to make precise calibrations to the pulse width at build time.
4. No aligator clips, no button to hold down, no limitation to session length, many times more pulses per session.
Grounded mode still works with the new pulser.
Let me know if you have other questions. Robb

Someone asked the following questions:

From: Ruth Trimble
To: Lyme-and-rife@yahoogroups.com
Sent: Tuesday, November 16, 2004 11:54 PM
Subject: Re: [Lyme-and-rife] MPM2 Magnetic Pulser

Dear Robb,
Two questions for you: 1) what does this mean,"20-30 hz is important
for lyme" Could you explain a bit about hz's? What are they and how do various machines used by the group measure to this criteria?
2) what's the cost for the MPM2?
A third question: Is this machine quite different in structure from the original mag pulser you created? Should and can the MPM2 be used in "grounded mode?"

I appreciate basic technical explanations in response to these
questions, as I've forgotten some of our lingo. """""

Robb (the designer) responded:

"From: "Robb Allen"
Date: Tue Nov 16, 2004 10:12 pm
Subject: Re: [Lyme-and-rife] MPM2 Magnetic Pulser

"""""
Hi
It was believed by doug (of course using the doug device) that spirochetes were killed while rifing in the range of 20 to 30 hz. 1 hz is one pulse per second. 10 hz would be 10 pulses per second.....so on and so forth. I know that many folks do those frequencies with the doug and also with the emem. Both of those machines will do those frequencies however at much less power than what I am talking about........on the same note......the MPM2 is NOT a rife machine. It will however operate as one in that range. (but at 120 amps)
Check my website late tonight or tomorrow for the price.
The MPM2 is hugely different than the original.
1. it will do many times the work of the original with no moving parts to wear out.
2. The pulse generator will NOT overheat.
3. The coil won't overheat because we are able to make precise calibrations to the pulse width at build time.
4. No aligator clips, no button to hold down, no limitation to session length, many times more pulses per session.
Grounded mode still works with the new pulser.
Let me know if you have other questions. Robb""""

I am not affiliated with this device in any way and unfortunately I'm not in a position to coment specifically on its effectiveness.
I'll say this...anyone want to buy me one? :)

http://www.highpowermagneticpulser.com/

Tweet