Re: True colloidal silver generator for around $200?

I have looked into that kind of power supply and have concluded that it is overkill and not suitable to the current required to produce high quality ionic silver.

We need 1 milliamp which is far too small of a current to control on the 5 ampere meter.

I suggest using a 30 to 36 volt DC wall wort such as this unit, only $12
https://www.amazon.com/SMAKN-110V-240V-Converter-Adapter-5-52-5mm/dp/B0150ZYHOO/ref=sr_1_2?s=electronics&ie=UTF8&qid=1475602715&sr=1-2&keywords=power+supply+36v

Then put a 1 Milliamp Current limiting Diode is series with the plus lead of the power supply and the silver Anode.
Wiring the Diode by Esstee
//www.curezone.org/forums/fm.asp?i=2259054#i

Or you can also use a 1 megohm potentiometer instead of the current limiting diode.

Making the generator using a 1 megohm potentiometer. After being adjusted to your power supply, the potentiometer needs no further adjustment.
https://www.youtube.com/watch?v=KgAgsS5h8is
Comparing different currents of 1.0, 1.25 and 1.5 milliamps
https://www.youtube.com/watch?v=VeVsgCxLO1k
Quality Tips
https://www.youtube.com/watch?v=Yt42tpEvY8w
The Tyndall Effect
https://www.youtube.com/watch?v=vIUiK-ef8Hs

The results will be as good as any expensive generator. I like either design because they can make any size batch from 1 cup to 5 gallons and any size PPM. Just run it longer to make a higher PPM, and run it longer for large batches. Any 24 hour timer can be used to control automatic shut off. I would not be happy with anything that makes less than 1 gallon batches.

This is the generator I recently bought:
https://www.youtube.com/watch?v=lOKnp9Y54Ls
( I like PREMIUM products )

See more help for buying or making a generator here:
http://tinyurl.com/silver-generators

Best to you,
Grizz Tweet