What Causes a Green Pool?

Green pool water is a common sign of algae growth and is typically due to pool chemical imbalance, such as low chlorine levels or insufficient circulation. Algae do well in warm water, and they can overwhelm the pool if it’s not treated. A green pool must first be treated by balancing your pool's filtration system, circulation, and chemicals.

So while adding baking soda can assist with some tasks related to pool maintenance, it is not the treatment for algae growth. But it contributes to complete pool maintenance.

Can It Get Rid of Algae in Your Pool?

Sodium bicarbonate or baking soda is often used to increase pool alkalinity, but it doesn’t kill algae directly. If the reason your pool water is cloudy is because of an algae bloom (and it’s green), you’ll need more targeted treatments like algaecides or chlorine shock, which are meant to kill algae and bacteria. Using baking soda raises the pH balance of your water without resolving your algae issues.

You can use Baking Soda to Maintain Your Pool.

Baking soda can help – it helps balance your pool's alkalinity, and this balances your pool water, so it is indirectly helpful in keeping the water clear. Alkalinity is what buffers your pH level, keeping it from swinging too much, too fast, and creating issues in your pool. Here’s how to use baking soda for pool care:

• Check the pH and alkalinity levels: Use a pool test kit to see if you have low alkalinity in your pool. The ideal alkalinity levels are anywhere within 80-120 ppm (parts per million).

• Consider using a large amount of baking soda: As a general rule of thumb, if you want to raise the alkalinity by 10 ppm, you must use 1.5 pounds of baking soda for every 10,000 gallons of water. Consult the baking soda package for the manufacturer’s recommendations.

• Run the pool: After adding the baking soda, let your pool’s filtration system run for a minimum of 24 hours, which helps distribute the chemicals throughout the water uniformly.

Although this is the step to keep the pool chemistry in check, the emphasis should remain on eliminating algae blooms and enhancing filtration to clear green water.

So how exactly does a robot pool cleaner help get those green pools?

If your pool is green due to algae, a robot pool cleaner like the Beatbot AquaSense Pro will help clean the pool’s surfaces. Robotic pool cleaners are designed to scrub and vacuum debris, including algae, from the floor and walls of your pool. Here is what a pool-cleaning robot can do to help you clear your green pool:

• Vacuuming the Sidewalls and Floors of a Pool: The pool robotic cleaning is equipped with strong brush systems that scrub away algae from the surfaces to make sure that it’s taken off and captured by the filter.

• Scrubbing & Vacuuming: With a high-pressure jet scrubber and a suction head, it can suck up any debris or algae that can be left in your pool after scrubbing.

• And it Helps With Circulation: A pool skimmer is good for surface debris, but a robot pool cleaner operates at a deeper level, helping to generate water circulation — an important factor in preventing algae growth.

• Time-Saving: A swimming pool robot like the Beatbot AquaSense takes away the need to spend hours cleaning your pool manually. The robot does all the strenuous work for you so you can spend the time you need to ensure the chemical balance and do other maintenance.

How to Clear a Green Pool: Step-by-Step

If you want to clear a green pool, here they are:

• Test and Balance Chemicals: The pH, alkalinity, and chlorine levels of the pool water should be tested. So, if the pH is low then add baking soda to the pool to raise the alkalinity. If chlorine levels are low, shock the pool with a chlorine-based pool shock treatment.

• You Have to Treat the Green Water With Algaecide: Use a specific type of Algaecide for your pool. This will kill the algae, but it could take a few days until it’s completely cleared.

• Run the Filter and Pump: Keep your filtration system running continuously to assist in clearing the water of dead algae and debris.

• Run Your Pool Cleaner: Once the water has begun to clear up, set your robot pool cleaner to scrub the pool and suck up the debris. This will assist in removing any leftover algae and grime from the pool surfaces.

• Test Water Clarity: After the robot has cleaned the pool, test the water again for clarity. If it’s still cloudy, repeat the chemical treatments and cleaning steps.

Conclusion

However, baking soda will not clear a green pool alone. You have a few different ways of removing algae and they include resolving both chemical imbalance and the cleanliness of the pool. Having a robot pool cleaner such as the Beatbot AquaSense Pro will surely simplify and speed up the cleaning process. With the proper balance of chemical treatment and robotic pool cleaning, you can have your pool sparkling clear, and keep it that way, you can keep it clean all season long.

Add This Entry To Your CureZone Favorites!