I personally do not advise the purchase of a MiniFG as I personally feel its overpriced and limited. Why pay over the odds for something limited compared to a proper standalone Frequency Generator? These can be picked up for some excellent prices and here in the U.K theres a company which sells older models for really cheap prices. I'd rather have a Terminator and a proper Frequency generator. If you want a frequency generator from the alternative sites then get a F100-160 series model which is far superior to a MiniFG. Also RIFEING is excellent but again unless you truely know whats in you how can you truely defeat it 100%? Also theres alot of talk about frequency changes over the years with certain pathogens etc. Say it was I dunno 10Mhz its changed to 12Mhz now say?!?! At least with a device like a Fscan etc you can have things like Wobble functions which you can set to go either side of a given frequency for better hits. For RifEing I would not bother personally unless I had a DIRP function from an Fscan or future device. Theres always the extremely difficult method of detection by Dr.Jeff Sutherland but not many people can do this. Like I said before get a DIRP function, Zapper and Frequency Generator (not MiniFG) and your laughing! UZI alot of the problems with a good zapper then SNIPER the rest with a rifle (rife) later. Makes work much easier and quicker. People must understand the benefits of ORgone etc in the Terminator more as they are powerful healers and proved time and time again against other zappers. The only difference between a Terminator and other zappers is generally the T is far lower in frequency giving a better penetration although its square wave signal does get weakened on the body. The only things which are obviously making this zapper far outspeed the others in healing is the Orgone, Gems, Mobius and Magnet therapy which go along with it. Please look at some proper bench Frequency generators before wasteing your money on a MiniFG as I seriously do think they are a rip off. Also if you want to seriously get into SNIPERING and RIFEing you cannot do this unless you get into Plasma tubing etc as RIFE was not a contact device person his were all done with Plasmas etc. John Crane is the contact device guy. A contact device can never be as powerful and as quick as a Plasma high voltage discharge. Yes I love my Argon tubes ;-) What a whack and funny when you go near a fluoresent light and it shines like no tomorrow.

The frequency generator I had previously refered to but forgot to post the link is here:

http://www.ntscope.com/m1-8.html
Electrodes for the Madell 20mhz fg are pictured at bottom if you wanted to use it as a contact device. Similiar machines can cost 2x as much.

20 MHZ output frequency generator-
sine,square,triangle,pulse waves available
Positive DC offset possible 5 volts
Rise/fall times on the wave are under 17 nanoseconds (variable)
Programming in sweeps between given frequencies and for a given duration of time should be no problem. But ask Madell. Of course Robin's f160 makes childs play of this. Extreme specifications are possible with an f160. Can't wait to see exactly how Dave Trebing is going to use this with his new plasma tube machine and what max freqs will be possible. Looks like a ver high multi mhz carrier will be possible. Research is complete and in design phase.

The Madell fg is at least $100 less than the mini fg ut not as near portable (mini fg is wearable too). As far as functionality, there can be no mistaking that the Madell 20mhz fg is far and away is a completely different class if you look deep into the specs. Know this, try function/frequency gens are made for ENGINEERING and therefore have strict quantifiable specs that are also published. With a serious users manual to boot. For Pete's sake, their for the purposes of serious "Bench Work." On the other hand the mini fg and devices like it are made for the general populace which typically don't have a great understanding of electronics/engineering/electricity.

Anyone and everyone knows what I feel is an incredible value if one seeks a "signal source" component/fg to provide the freqs in a plasma setup.....the f160 2 channel device. Atelier's other fgs are also 2 channel but do not put out voltage, have lower max freq output, etc. Still awesome and even cheaper. The f160 is obviously an incredible stand alone fg for contact use as well. I've talked with Robin many times and begged him for several things. With the addition of other voices, he'll have some pretty sophisticated equipment possibly next year. What he has released recently is what several of us had asked for which is a power amplifier to raise the f160 voltage. Consult his site.

Vtool, thank you for the kudos. You are deserving of more with your humble research.

Vtool, Ron says he has acheived a "true Rife Effect". Wow, with all due respect to an accomplished healer, there would be many Rife researchers that would pay and enjoy seeing Ron "blow a bug" under a mic. I sure know James Bare would have a watchful eye on the microscope to see if Ron could actually shatter a microbe as James has proved....and Scoon by accident. Wow, if anyone has researched the "Rife Effect", you know these are lofty claims. I am NOT disparaging Ron, simply would love proof of this phenomenon.

Hey Steve555...you said """Thanks everyone. I would love to get a real Rife machine like the GB4000 or maybe one of Bruce Stenelsons machines and an LBG and a Molecular Enhancer and the list goes on. But you have to go with what the pocketbook allows."""

The GB4000 is not a Rife machine technically. It is a John Crane and to a MUCh lesser degree John Marsh manifestation. Both 1950's researchers that encouraged Rife to get a grip and to get back into the game. For the most part Crane changed amny many many aspects to Rife's equipment for several reasons beyone the scope of this thread. Yes, he did initially stick with plasma tech, but I elieve quickly changed to contact electrodes. Long story short, a device like the Madell 20mhz fg is essentially what he came up with and was selling for many years at I believe conferences in the Hilton(?) hotels. Difference is, today's fg's are much more precise, etc. He may have used a signal amp...not sure but we do know this is not nexessary at all for results. Annunaki has rightly pointed out that some cheap components can help keep the square waveform square as it enters the body.

That said, Jeff G. who makes the GB4000 will/has made an add on plasma tube for that device. So you have essentially a rife plasma device at this point.

Bruce S. devices have a loyal following as well as Dr Loyd. These are EMEM devices and are high voltage. They have the same goals as Rife's equipment, but take a different but very similiar road to get there. Some rifers may technically diagree that EMEM devices are truly Rife. Actually, if you want to get down to brass tacks, if a Rife machine doesn't produce the Rife Effect (able to blow away a bug under a microscope at distance utilizing a very exact "coordinative resonant frquency) then it simply isn't "rife." Loosely put, this is waht A. Scoon has claimed and many agree with this. Where does that leave us? James Bare and the Rife/Bare device. Only device proven to blow a bug under a mic. But has it been repeatable? Ask James.

With respect to Vtools great suggestions on Ron's tumor research...
Dr. Holt in Australia has created a HUGE ruckess in Australia. Big big deal here. The news program "A Current Affair" has picked up this mans life story of the last 20 odd years and his ability to cure cancer..typically of tumor origin. He never wanted the attention or to be in tv. The citizens are outraged that the medical community has not invested in Holt's technology and made it available to the citizens. He uses 434mhz (not a misprint) (lightning that is about half the way to microwave..remember our microwave and clark freq convo?) to devitalize the tunors. It is a 3 week program and he can treat 26 people a day. Millions in Australia are lashing out at the gov;t for not only their lack of support, but for their persecution of Holt. His sucess rate is through the roof. People wanted so much of the story, they have been doing multiple TV shows on Holt's work. I'll provide the video links later.

In a nutshell it has many similarities to Rife's work, is painless and has no side effects. The lines outside his office now that the word has hit the news last month are Looooong. The upshot is that wouldn't ya know it, the "allopathic medical establishment" has apparently already answered the puclics frustration and created a similiar device. Both machines working on beam ray technology. They unfortunately didn't do a good job discussing if the beam what ionized plasma or ?. I believe Rife's work was far more powerful when one of his legendary machines were being used from the 30's.

On the subject of "Dirping" (fscan language). There are at very least a couple of companies involved in Rife Plasma Tech that are currently working on resonant frequency scanning for the body. I'll relate that later too. And of course we have the BodyScan 2010 machine, but I know little of it. QXCI as some of this function too.

I want to repeat this thought. Please don't think it is not possible to "wobble" a frequncy with any ordinary off the shelf engineering fg. You can find them dead cheap used on ebay.com. This is called "sweep" in both engineering equipment and with Rifers. Inputting 2 freqs into a fg is possible with a sweep fg. You can have the fg execute every single freq inbetween the 2 lower and higher freqs you started with. You can choose how long in time you want each of the freqs to run as well. Just look at any given fg you are interested in for these "sweep" functions. the f160 running the constantly updated f100 software can do all kinds of things with *2* waveforms simultaneoulsy and 100% modulation. Atay tuned to what Robin is doing. He is quite the programmer and leading Rife Tech into some interesting possibilities.

Rife Plasma tech hasn;t looked this good since Rife's days. Alot of "stuff" being worked on now. The next 5 years can be something special. And maybe, just maybe the public puts the medical field under fire and on notice instead of the other way around.

http://www.ntscope.com/m1-8.html

Thanks everyone. I would love to get a real Rife machine like the GB4000 or maybe one of Bruce Stenelsons machines and an LBG and a Molecular Enhancer and the list goes on. But you have to go with what the pocketbook allows. The MiniFG looks cool and portable. The F160 and F100 look less portable and then I would need a Palm Pilot or similar with it, right? Well at least I have my T2 and CS generator. Oh and my little LED array from V.
Thanks Again
Steve