Not sure if I mentioned I'm trying the Alex Chiu Magnets now slight improvement.. and reading recent post more than likely I'm find it true, Thanks!

another illustration at 1:57







http://www.counterpunch.org/2016/11/02/living-in-a-5g-world-wireless-pollution-is-getting-out-of-control/



https://www.emfanalysis.com/cafe-thrives-without-wifi/

Comments beneath above article:
Travis Burch

August 22, 2016 at 9:24 pm

Figured I’d tell this story here about how things are shifting even within the industry…

I saw the AT&T trucks today, the guys were working on the cell towers. I’ve been wanting to talk to them for months but I never get a chance to talk to them.

So I walk over there today and just then a guy comes down and says “Hey”.

So I said “Hey man, do you mind if I ask you some questions about the cell towers?”

He said “Sure thing, go ahead”, real friendly.

I then asked a bunch of technical questions about the design of the towers and stuff, just saying I was fascinated by the technology. He answered them and I learned a bunch of stuff. He mentioned that the round antennas are higher frequency microwaves.

Then he said that the US is soon going to 5G, Korea (I think) is already going to 5G and “they’re ahead of us”, but that “lots of countries are holding off on 5G because of environmental concerns and health concerns”.

I said “really?”

He said, “Yeah, and the head of the FCC recently said ‘We’re not going to let research slow us down.'”

I said “Wow, he said that? That’s really bold.”

He said “Yeah I think so.”

So I said, “Are you interested in the health concerns from this stuff?”

“Yeah, I mean…yeah.”

Me: Me too

Him: Really? Lots of us in this line of work are getting leukemia and cancer.

Me: I’ve been interested in it for a while because I work here, so close to two towers.

Him: They used to turn off the transmitters when we worked on them. Now they refuse to turn off the transmitters while we work on them and they don’t let us carry around a RF meter anymore. They’ve got transmitters on top of buildings now. . .

Me: Yeah I’ve seen them!

Him: Yeah! You know the M****** H****** Hotel? I was just up there. And you just walk right up to them.

Me: Really? Man you’re right in front of those things!

Him: Yeah, and they’re not turning them off anymore. I’m just getting blasted.

Me: I’ve got a meter and I get readings at this school of 10-20 mW/cm2 per channel. And a cell tower has like 70 channels right?

Him: You have a RF meter? (He couldn’t believe it).

Me: Yeah! I drive around town and see what the levels are like.

Him: No way, eBay? Amazon?

Me: Amazon.

Him: How much was it?

Me: Like… $190.

Him: No way… Like I said, they forbid us from having them now.

Me: So I just looked up the federal limits on Saturday. It says the federal limit is 10 mW/cm2. On this playground I’ve gotten a reading of 15 mW/cm2 on one channel… but the cell tower puts out 70 something channels, does that mean it’s putting out roughly 15×70 mW/cm2?

Him: Most likely, yeah. Yeah all of us are worried about it. It’s high enough levels to heat things up. My face burns whenever I use a cellphone.

Me: Everybody at the school is always hot, even when the air is cold.

(Note: radiant heat [long wave light] heats up a body without heating up air).

Him: Really? The industry people are actually worried that 5G is going to have a really big, even more noticeable thermal presence because the high frequencies have so much more power in them.

(His phone started ringing).

Me: Great talking to you!

Him: You too! See ya!
Reply

Jeromy

August 22, 2016 at 9:44 pm

Thanks for sharing this story Travis.

I have heard similar stories from other people in the industry.

They are (almost) always interested when I pull out my RF meter to show what is going on.
Reply

Tom Whitney

August 23, 2016 at 12:01 pm

Travis – your meter can only measure the total power density over the entire range that the meter covers. You cannot measure individual channels as you have described. In fact, a $200 meter is no more than a toy. Measurements from it have no validity whatsoever.

You may want to do some do some additional reading on this topic.
Reply

John

August 31, 2016 at 7:10 am

Travis, I have a friend who also works in the industry. Is there a possibility if I send you my email, you would contact me? My email is alpenaunclejohn@yahoo.com. I am fighting smart meters in N. Michigan. Our State Rep. is a co-sponsor of a bill in the Mi. House to allow people to keep their analog meters without any fees. The Chairman of the Mi. House Energy Commission, Aric Nesbit, is refusing the Bill to come to the floor for a vote. His term expires this year. He is going to work for Consumers Energy in Mi. as a lobbyist for them. You can see where his loyalty is, certainly not for the people of Michigan.

John K.