How to brake properly on ice?
In winter, the pavement on the road is subject to icing, as a result of which many drivers do not take this factor into account and may not be able to cope with safe braking. For driving in winter, you should abandon aggressive driving, start moving, slow down, steer more smoothly, especially when it comes to ice.

Braking on a slippery road is done without a sharp effort on the brake pedal, otherwise there is a risk of skidding the car. Vehicles may be equipped with an ABS system, which may prevent the vehicle from completely locking the wheels during sudden action. However, even if you brake on a car with ABS, there is no guarantee that your braking will be fast.
The same goes for truck braking. Moreover, braking correctly on a truck on an icy road requires more skills. If you studied at the Go4CDL school for truck drivers - https://go4cdl.com/, then these skills were unconditionally taught to you. After all, a truck driver usually spends most of his time behind the wheel of a truck and will have to brake more on an icy road.
Therefore, combined braking with short and short presses on the brake pedal is used, regardless of the additional transport safety equipment.
One of the high levels of danger during icy conditions are intersections, therefore, when approaching it, slow down in advance. When a traffic signal is allowed, refuse to start abruptly, because such conditions can force the car into a dangerous situation - from wheel slip to loss of control.

How to brake correctly in a turn?
Turns are specific sections of the road that require thorough motorist skills. The first thing to remember is to brake on the mechanics before the turn should be in advance. This allows the car to smoothly enter the turn and not lose control of the vehicle. The speed during cornering should not change, it should be maintained during the entire movement - moving the foot from the brake pedal to the gas and gradually adding speed, the overall speed is maintained. However, if the speed is not suitable for cornering, depress the brake pedal with a few short presses.

When cornering, in no case should you squeeze the clutch and move in neutral gear, otherwise disappointing consequences will follow, such as a departure from the lane.