Well, this is getting interesting. Am very new to this technology so am stumbling through all this.

I connected what I surmised was a negative lead from a Freq amplifier that is being driven by a Freq generator to a quartz crystal wrapped with a Mobius coil. My first. Drove square waves and a lot of different frequencies at it. Ran things for awhile and began to feel a subtle but similar effect along the chakras as I do with hand helds. Good.

But here it where it gets really interesting, I thought. Have a digital multimeter. I use it to test voltage, resistance in circuits, etc. Still having trouble grasping the fact that there is only one wire actively connected to the coiled crystal, so I messed around with connecting the leads to various points of the circuit. Ended up connecting one lead to the positive lead from the Freq machine, the unconnected lead per your instructions, to the multimeter. I started probing with the other lead. I got for all intents scant bounces in readings in the LCD when I touched various points, like for instance the other end of the Mobius coil which is not connected to anything in this model. Touched crystal. Touched other exposed wires.

And then, I held it in my hand.... and the danged readings shot way up. How could that be? I then started to fiddle with the Frequencies and there it was. Readings which I am not sure exactly how to interpret them, but readings were responding to the changes in the Freq generator. But how could that be I thought. One end of the multimeter was connected to the loose and unconnected Freq output, and the other multimeter was connected to, me. There is no closed loop. Or, is there? When I shut off the Freq generator, the readings fell to 0. When I fired things up, they shot up. The only way I could describe it is my body, which is not connected to anything physically, was the other end of the loop. When I ran it without being connected to the crystal, nada. No readings. When connected to the crystal tho, and my hand "closing" the loop even tho I was not in any way touching anything on the Freq generator side, the multimeter was throwing out levels that were corresponding to the Freq generator's output.

Having little experience with all this, have to say, I was quite amazed to see this. And I am also not imagining that various points in the body are responding similar to when I run the Freq generator with hand helds. This is NOT my imagination. All this from a quartz crystal wrapped with a Mobius coil.

Right now, I am in a state of a big hmmmmmmmmmmmmmmmmmmm?!

Do you have any opinion of this Totakun? I advanced your instructions and there is something definitely occurring. I am quite intrigued by all this. These multimeter readings are unquestionably reporting something. And so is my body. All this is really intriguing.