Date:   11/20/2004 7:40:54 AM ( 20 y ago)
Hits:   8,609
URL:   https://www.curezone.org/forums/fm.asp?i=663878

H2O2 and Colloidal Silver
Colloidal Silver combined with H2O2 (Hydrogen-Peroxid) is quickly proving to be an effective combination. This combination can be used in oral, IV and external treatments. Please keep in mind that IV treatments should be considered highly experimental.

Adding H2O2 (Hydrogen-Peroxid) to a completed batch of Colloidal Silver ionizes silver particles remaining in the solution. In fact, observations demonstrate that extremely small amounts of ionic silver often plate onto glass surfaces. By taking a glass dropper exposed to colloidal silver and adding a 3% H2O2 (Hydrogen-Peroxid) colloidal silver solution, this reaction becomes visably evident as the metallic silver is ionized.

According to Water and Science Technology, Volume 31 5-6, a 1000:1 solution of colloidal silver to H2O2 is sufficient to increase the efficacy of colloidal silver by up to 100 times under some circumstances ( which remain unknown ) against bacterial infections.

High H2O2 colloidal silver strengths can be used externally with fine results. A 3% H2O2 colloidal silver solution can be mixed and used as an excellent disinfectant and water treatment method, and can be used as a skin cleanser/conditioner for healthy skin tissues.

H2O2 as an addition to colloidal silver is not very well documented although the mechanisms at work are. Two treatment philosophies prevail:

1) Using colloidal silver to augment H2O2 therapy. A 1:1000 colloidal silver to H2O2 solution is created. It is wise to dilute the H2O2 down to the desired concentration, and then add the small amount of colloidal silver to the end solution. Then, one uses this end solution as one normally would in H2O2 therapy. Adding three drops of a 3% H2O2 solution to six to eight ounces of water for internal use, as previously mentioned, is the standard recommended starting point ( see section below for more information ). For external use and for use as a mouthwash, the 3% end solution need not be diluted. The H2O2/colloidal silver external solution is EXCELLENT to treat ear conditions and infections that use the inner ear as an "incubation chamber". CAUTION: A 3% H2O2 solution created from colloidal silver is much more reactive than a standard 3% H2O2 solution. If one has experienced chronic ear or other tissue infections, unpleasantness can be avoided by using a 1.5% dilution. Simply take the 3% end solution, and dilute it further.

2) Using H2O2 to augment colloidal silver therapy. Adding small amounts of H2O2 to a final colloidal silver batch prior to use both enhances the colloidal silver and provides the benefits associated with hydrogen peroxide use. All dosage levels for hydrogen peroxide should be tailored to personal tolerance levels and used with informed caution.


©†ƒ……•™¼‡_Original_Message_¾€š½ž¢«»¬ï°©

H2O2 and Colloidal Silver
Colloidal silver combined with H2O2 is quickly proving to be an effective combination. This combination can be used in oral, IV and external treatments. Please keep in mind that IV treatments should be considered highly experimental.

Adding H2O2 to a completed batch of colloidal silver ionizes silver particles remaining in the solution. In fact, observations demonstrate that extremely small amounts of ionic silver often plate onto glass surfaces. By taking a glass dropper exposed to colloidal silver and adding a 3% H2O2 colloidal silver solution, this reaction becomes visably evident as the metallic silver is ionized.

According to Water and Science Technology, Volume 31 5-6, a 1000:1 solution of colloidal silver to H2O2 is sufficient to increase the efficacy of colloidal silver by up to 100 times under some circumstances ( which remain unknown ) against bacterial infections.

High H2O2 colloidal silver strengths can be used externally with fine results. A 3% H2O2 colloidal silver solution can be mixed and used as an excellent disinfectant and water treatment method, and can be used as a skin cleanser/conditioner for healthy skin tissues.

H2O2 as an addition to colloidal silver is not very well documented although the mechanisms at work are. Two treatment philosophies prevail:

1) Using colloidal silver to augment H2O2 therapy. A 1:1000 colloidal silver to H2O2 solution is created. It is wise to dilute the H2O2 down to the desired concentration, and then add the small amount of colloidal silver to the end solution. Then, one uses this end solution as one normally would in H2O2 therapy. Adding three drops of a 3% H2O2 solution to six to eight ounces of water for internal use, as previously mentioned, is the standard recommended starting point ( see section below for more information ). For external use and for use as a mouthwash, the 3% end solution need not be diluted. The H2O2/colloidal silver external solution is EXCELLENT to treat ear conditions and infections that use the inner ear as an "incubation chamber". CAUTION: A 3% H2O2 solution created from colloidal silver is much more reactive than a standard 3% H2O2 solution. If one has experienced chronic ear or other tissue infections, unpleasantness can be avoided by using a 1.5% dilution. Simply take the 3% end solution, and dilute it further.

2) Using H2O2 to augment colloidal silver therapy. Adding small amounts of H2O2 to a final colloidal silver batch prior to use both enhances the colloidal silver and provides the benefits associated with hydrogen peroxide use. All dosage levels for hydrogen peroxide should be tailored to personal tolerance levels and used with informed caution.



 

<< Return to the standard message view

fetched in 0.03 sec, referred by http://www.curezone.org/forums/fmp.asp?i=663878