Date:   10/12/2003 7:18:56 AM ( 21 y ago)
Hits:   1,532
URL:   https://www.curezone.org/forums/fm.asp?i=615803

1 readers agree with this message.  Hide votes     What is this?

CRYSTAL CARE
CLEANING, CLEANSING, BONDING & PROGRAMMING YOUR CRYSTAL



Buying a Crystal is just the start, now you need to know how to get your crystal to work with you.



CLEANING YOUR CRYSTALS


New crystals will have travelled far and been held by many people each contributing their vibrations to the crystal. These vibrations need to be neutralized thus restoring the crystal to it’s original clarity so that you can impress your own pure intentions upon it.
It is recommended that you carry this out regularly especially if your crystals are used for healing. A crystal with imbalances or energetic static can be detected by a feeling of heaviness or unpleasantness.

Try using a pendulum to help you determine when the crystals are ready to come out of the bath. This method works well for me, although I usually walk past the cleansing crystals and intuitively know when they are "done". When you pour off the salt water, do not touch the water or you will be transferring the negative energies back onto yourself. remember to thoroughly rinse off any salt resideue from your crystals. I let the crystals drip on to newpapers or tea towels.

From my own extensive experience, I recommend using salt for crystals that are able to take salt. Salt is really good for removing negative energies from most crystals. However, some crystals like Angelite and some marbles and pearls are sensitive to salt and their surfaces can be damaged very quickly in a salt pack. For those, you can use a smudge (see below.).

You don't really need to submerge your crystals very long in salt. A minimum of 7 hours is usually all that is needed unless you have crystals that are extremely toxic for some reason. Get a glass bowl large enough to hold your crystal(s). Fill the bowl with salt to cover the crystals by about 1 inch. Some people use salt/water solution. The "perfect" cleansing solution in this case is a 30% solution of Sea Salt and spring water. If you have genuine sea water, use that ! As a intuitive, I usually just throw a handful of salt over the crystals and just leave the bucket in the sun to soak when using this method.

Try using a pendulum to help you determine when the crystals are ready to come out of the salt. This method works well for me, although I usually walk past the cleansing crystals and intuitively know when they are "done". When you pour off the salt water, do not touch the water or you will be transferring the negative energies back onto yourself. remember to thoroughly rinse off any salt resideue from your crystals.

Some people ask if there is a difference between using Sea Salt and table salt (rock salt). There is. Most people are not very sensitive to subtle energies. In my experience, I find that Sea Salt leaves the crystals with a different feeling than table salt . Sea salt has a more refined energy signature with a lot of small rainbow-coloured vibrations. table salt is like a workhorse, less subtle, more coarse and has clunky yellow and grey-blue vibrations. If I plan to use a crystal at my upper chakras (3rd Eye or Crown), I will want it cleansed in sea salt, as these centres are very refined on my body and I prefer the more subtle vibration. Wouldn't you ? Try placing two crystals - one in sea salt and one in table salt. Rinse thoroughly and then see if you can tell the difference energetically.

I've also smudged crystals with sage, sweetgrass or incense such as frankincense to cleanse them. This is especially good for crystals that cannot be placed in salt. I usually spend about 3-7 minutes doing a smudge, fanning the incense over the crystals with a feather fan. This is particularly good of you have a whole cabinet full of crystals or some that are very large and awkward to bathe. Try not to use your hand as a fan - as the smoke rises, it pulls out and takes the negative energies away from the crystal. Passing your hand in this smoke will track these negative energies onto yourself. Don't forget to give yourself a good smudge to clear your own negative energies, especially your hands which are handling crystals directly.You can also rinse your hands in salt water after using the crystals either on yourself or someone else.


VISUALISATION: Take a deep breath and blow over the crystal. Imagine that you are clearing away all negativity. Repeat until you feel the crystal is cleansed.

**SEA SALT**(great method): Use dry sea salt in a small container and bury the stone for between 7 - 24 hours. Don't use salt water as prolonged submergence can damage softer stones.

SUN & WATER: Hold the stones under running water for a minute and then place in the sun to dry. Not recommended for stones susceptible to fading: Aventurine, Amethyst, Citrine, Rose Quartz, Smokey Quartz
SOUND: The vibrations of a pure sound can energetically clean a stone. Use either a bell, gong or tuning fork.


CHARGING CRYSTALS


Sunlight re-charges crystals with ultrviolet light, sometimes called light radiation. You see, when the crystal comes from the Earth, it is has been nutured in yin energy, the feminine. The crystal has been taking nutrients from the ground - gases, water, various minerals and other nutrients to develop into a crystal. When it is "harvested" from the Earth, it is being removed from the yin energies and needs now to receive yang energies as its source of energy renewal. So, the ultrviolet light from the sun, the full spectrum of light, restores the crystals depleted energies. The time it takes depends on the crystal's capacity to absorb the light (it's crystalline energy structure has a lot to do with it), the stage of energy depletion within the crystal, and I think the will of the person who has been handling the crystal. Typically, I find 4 hours in the sun once a week keeps a small crystal energetic and alert. However, some crystals require a much longer time to recharge. You can experiment with the crystal by putting it in the sun for 1 week then holding it in your hand. You may receive and energy discharge from the crystal ! Also use your pendulum to check if it is ready and also to find out the percentage of replenishment.

There are another six methods of re-charging crystals that I teach in my crystal healing classes. Programming a crystal will also take up some of the energy of a crystal and that you may need to recharge more often depending on the usage of the crystal. Also crystals vary a lot between each other in terms of ability to store energy. Size has something to do with it, but also the energy structure of each crystal will be different.in its ability to hold an energy charge.


BONDING WITH YOUR CRYSTAL


Bonding with a crystal ‘tunes’ it to your mind and vibration making the crystal a part of your psyche. Bonding is very important and should be carried out with every crystal whether it be a large expensive specimen or an inexpensive tumbled gemstone.
Find a quite place and hold the crystal in your hand, with your eyes closed try to feel it with your mind; it’s touch, energy etc., After a few minutes open your eyes and explore your crystal, delve deep inside noting its colour, shape, flaws, inclusions and imperfections, become familiar with ever angle and part of the crystal. This process creates a permanent image of your crystal in your mind.
That’s it, now you are one. It only takes a few minutes and you should do this with every crystal. From here you can go on to program your crystal if you have a ready intention, or you can save it for programming at a later date.


ACTIVATING CRYSTALS


Some readers will not be familiar with how to activate a crystal. Sometimes, a crystal can be a "sleeper", and needs to know it is going to be used for healing or meditative purposes. Making a spiritual connection with the crystal helps to activate it, to awaken its consciousness. You can activate your crystal through an initiation ritual, by holding it, rolling it quickly back and forth in your hands, sleeping with it, gazing at it, washing it and generally handling it. To awaken its consciousness through ritual, offer some sage, sweetgrass or tabacco and indicate your intent for use of the crystal (e.g. for healing). This event marks the initiation of the crystal and makes an energy connection with the person using the crystal. Remember to fully recharge your crystal after you've been handling it for activation purposes.


PROGRAMMING YOUR CRYSTALS


Why do we want to program our crystals ? There is a folklore that crystals carry programming (a set of instructions) put there by other people or other beings before we acquire the crystals and that sometimes we do not want that. Well, I have the view that first, crystals come on the planet already with a set of instructions on how to grown, what structure, where, how fast and with what energy characteristics - just like humans who have a set of genetic instructions. This inherent pattern cannot be changed. It is up to your own belief system whether there were extra-terrestials or others who have loaded instructions into crystals or not. Let's move on then.

Second, each crystal has its own mission, or its own programming for healing. Sometimes, it is to provide a grounding force on the planet, maybe working energetically with other crystals in the earth to provide a network of stabile energy across the planet as part of the physical matrix of the planet. Sometimes, the crystal will carry a specific energy signature by resonating tones, colours and other vibrations that are provided through compassionate forces for humans and other life forms on Earth. Crystal people sometimes say that a crystal resonates for a particular chakra, or has a mission to "clear a past life" for instance. We don't want to harm that type of programming either.

Third, there is a blank database in each crystal. This is a spiritual (ie, not physical) energy centre which has the ability to store new instruction. Just like humans who have infinate capacity for spirituality, the crystal can translate and absorb an energy signature from outside itself and store it into a crystalline energy structure within itself. Now this is the real esoteric work of a crystal ! The mundane Science of a crystal explains some of how these energy instructions are stored, but now we've left that far behind now and are going into an area of deep inner science! This database sometimes gets filled up with unconscious instructions from people handling the crystal, unaware they are projecting energy thought forms that are picked up and stored by the crystal. So, we will want to be sure that the database is empty of any unknown programming first. When we add our set of instructions. The crystal will then resonate with those instructions, amplifying, broadcasting, and projecting the new set of energy patterns to ourselves or others as directed.

Here are some different programming techniques used with crystals.
1) A simple method is writing a thought on a piece of paper then placing a crystal on top to absorb the thought energy. The crystal magnifies the thought and acts as the transmitter, sending the thought in its amplified state to the target person or thing mentioned in the note. You can also use one of the other methods below and place the crystal on a person's photograh to send them an amplified thought.
2) You can also program your crystal by holding it in your hand then breathing in through your nose, hold the thought in your mind of what you want, then forcefully breath out (snort !) into the crystal through your nose. Do this on each side of the crystal to program it. There are 6 sides to a clear quartz crystal. This is a powerful programming technique that I teach in my classes and hope you will benefit from it. You can also read about this technique at the Vogel-Cut Crystal site.
3) Another method is to create a circular breath by holding the thought of what you desire in your mind and then breath slowly and naturally through your nose into the crystal and then breath energy back in from the crystal. Repeat this circular breath for 10 - 20 minutes. This is an effective meditative techniqueand is quite powerful to direct your mind for positive results.

You can put as many thoughts, affirmations or items such as holographic images into your crystal. Whenever you want to clear them out, just forcefully breathe the word "CLEAR!" into the crystal 6 times (one for each side of the crystal) and this will be done. By the way, if you are holoding a crystal and are thinking bad thoughts, don't. Put the crystal down and clear your mind. Revisit yout intent and then you can proceed to use the crystal, unless you need to cleanse the crystal of any negativity its picked up or to clear it of any unintentional programming. Crystals are indiscriminate about energy, but Spirit isn't - so please use them for positive purposes.






 

<< Return to the standard message view

fetched in 0.05 sec, referred by http://www.curezone.org/forums/fmp.asp?i=615803