Date:   1/24/2017 6:54:31 AM ( 7 y ago)
Hits:   1,819
URL:   https://www.curezone.org/forums/fm.asp?i=2351812

RE: Do you need to boil the water first (100 C temperature) before starting the generator?

A. If heat processing is your goal, then the answer is: yes.
Also, it's important that both electrodes(anode and cathode(s) be pure silver with heat processing as the metals will leach into the solution.

In addition to this, the optimum startup point is determined when all of the electrode surfaces no longer produce bubbles from their surfaces. - indicating that the entire assembly has equalized and is at optimum. 

RE: And when the generator has started, do you keep the water at boiling point (100 C) until the end of the process?

A. Yes

RE: If you're going to use the CS you're making for asthma with a nebulizer, is it better to apply heat during processing or no heat?

A. Unfortunately, I have no experience with this personally. - hopefully someone else will chime-in to help.

<< Return to the standard message view

fetched in 0.00 sec, referred by http://www.curezone.org/forums/fmp.asp?i=2351812