Date:   12/7/2016 11:55:44 PM ( 8 y ago)
Hits:   2,018
URL:   https://www.curezone.org/forums/fm.asp?i=2346101

Thank you for the video. It is interesting and gives me some ideas. I like the idea you have with the heater which would get around the need for a heating magnetic stirrer which I do not like the idea of because of poor shielding. I might be able to incorporate the idea into my design but so far I have not been able to find a similar heater. What would that be called?

Searches keep bringing up all manner of things such as kettles and electrical heaters but nothing remotely close to what I am looking for.

It might be easier if you added a temperature controller to control the heater so you do not have to keep monitoring it. There are simple temperature controllers on Amazon and eBay to control temperature and monitor the temperature. STC-1000 is one which is fairly inexpensive and there is a new firmware available for certain models which provide better control of temperature such as different temperatures at certain times which is not available with the regular firmware. It might come in useful if you do any fermentation.

https://github.com/matsstaff/stc1000p
The place to purchase the correct ones which can be firmware updated can be found on those pages. I want to get one myself when I can.

It would be a good idea to implement some form of stirring because that keeps the quality high. It's difficult to maintain quality ie avoid agglomeration without some form of stirring.
 

<< Return to the standard message view

fetched in 0.02 sec, referred by http://www.curezone.org/forums/fmp.asp?i=2346101