Date:   9/28/2016 11:36:57 AM ( 8 y ago)
Hits:   2,108
URL:   https://www.curezone.org/forums/fm.asp?i=2336882

Yes Grizz, I do tend to be in a hurry at times.

As for adjusting cathode length, the silvertron instruction sheet suggests maintaining >10v throughout the process. With electrolyte in the mix I generally only have about 1/4" of cathode submerged to maintain >10v.

Between reading your last post and watching the progress of the electrolyte-free batch I started this morning, it's apparent that the conductivity in an electrolyte free batch never gets high enough in a 20ppm run to drop the voltage below 10v.

Unless for some reason I want to make a batch in a hurry, in the future I'll likely skip the electrolyte.

Thanks Grizz.

Mark
 

<< Return to the standard message view

fetched in 0.02 sec, referred by http://www.curezone.org/forums/fmp.asp?i=2336882