Date:   3/31/2010 4:23:11 PM ( 14 y ago)
Hits:   5,621
URL:   https://www.curezone.org/forums/fm.asp?i=1598921

0 of 0 (0%) readers agree with this message.  Hide votes     What is this?

If you have a problem with acidity that began ONLY after you started using zappers and positive offset frequency generators... READ THIS

Quoted from a Rife forum
"Passing any significant amount of direct current through a body sets up electrolysis, causing tissue injury resembling a burn at the contact points. (With very, very small currents this may not matter.)

The water in us separates into its hydrogen and oxygen components, destroying tissues in the process. Usually this happens to the skin under the contact where the current is concentrated. Also, a DC current can allow the transfer of metals in the electrodes into the body via electrolysis, something else that is generally undesirable."

In short, acids will begin to form or collect at the site of the contact points, AND metals from the electrodes will absorb into your body! If you never had a heavy metal or copper issue before you started dabbling into electromedicine, and now you do, well now you know WHY!!!

Of course, zappers still provide much benefit. I am not here to dispute that. Some electrolysis can be a small price to pay in an emergency situation. But be aware of this next time you decide to leave the electrodes stuck to you for more than 7 minutes... Hulda Clark was not stupid in telling people to take that 20 minute break. Surely, an electronics-savvy person like her would have known that the electrolysis effect was occurring... and metals were being absorbed...

Yum yum, copper toxicity anyone??

NOTE: These issues are more of an issue when using high voltages or low frequencies. More power is NOT ALWAYS BETTER!!! ParaZapper has been screaming that for ages and everyone seems to ignore it.
 

<< Return to the standard message view

fetched in 0.02 sec, referred by http://www.curezone.org/forums/fmp.asp?i=1598921