CureZone   Log On   Join
 

Resource needed for parts for building a UV high output Ozone Generator by PaulSTL ..... Oxygen Therapies Support Forum

Date:   1/21/2010 4:02:47 PM ( 14 y ago)
Hits:   2,539
URL:   https://www.curezone.org/forums/fm.asp?i=1558571

Hi,

I want to build a UV ozone (not corona discharge) generator for use in "shocking" smoky furniture, moldy rooms etc. and need to find a lamp/light company that sells a UV high output Ozone lamp. Though it's considered a germicidal lamp, not all germicidal lamps create ozone. Some manufacturers make them specifically to produce little or no ozone.

I've called a few of the big lamp/light companies listed on Google and so far, none carry them. Typically they either carry the non-ozone producing lamps or don't know what I'm referring to.

Here is what I need:
* high ozone output UV lamp
* fixture/connections/wiring
* ballast

Specs for the lamp:
* 500 - 1000 mg/hr ozone
* 110v
* must fit inside an 8.25" enclosure

With these, I can easily install into a case with fan etc.

There are companies that sell great UV ozone generators and the replacement bulbs for them but while they'll probably sell me a lamp, they'll probably not tell me where to find the fixture/wiring and ballast to run it. (Certainly understandable.)

I've found some small ozone producing UV bulbs on eBay but they don't require a ballast which makes me think that they're probably for use in toothbrush cleaners.

And no, I'm not working so I can't afford a commercial unit (but have placed an ad in Craigslist for a used one). A company in the US or Canada is preferable. Any suggestions? Thanks!

Paul
 

<< Return to the standard message view

fetched in 0.02 sec, referred by http://www.curezone.org/forums/fmp.asp?i=1558571