Date:   8/16/2009 12:13:05 PM ( 15 y ago)
Hits:   5,308
URL:   https://www.curezone.org/forums/fm.asp?i=1473778

Directly related to this, has anyone ever actually measured (monitored) the constant current output of a SilverGen SG6 or a Silver Puppy or a Silver Edge Micro-Particle generator? If so, how many uA or mA did it steadily deliver in actual practice?

JAB

I used a Fluke meter shorted across the electrodes of a Silver Puppy. It measured 1 mA. The Sota Silver Pulser measured 1.5 mA.

It would probably take about 5 hours to make 10 ppm with a quart of distilled water. Depends on many factors like surface area of electrodes, temperature of water. Conductivity of water at beginning, phases of the moon, etc. You could also seed the water with some ionic silver from another batch to get the reaction going faster if you're in a hurry.

I make about 25 ounces of 18 ppm Ionic Silver in about 5 hours. I don't really care how long it takes as I just have it turn off automatically with the silver puppy.


 

<< Return to the standard message view

fetched in 0.02 sec, referred by http://www.curezone.org/forums/fmp.asp?i=1473778