CureZone   Log On   Join
Re: LightWorks Modes with the Nogier frequencies
 
  Views: 15,380
Published: 17 y
 
This is a reply to # 1,030,033

Re: LightWorks Modes with the Nogier frequencies


LED is just a light emitting diode. What is most important is the actual frequencies of light emitted, as different LED's will emit different light. As you know, visible light has wavelengths in the range 400 - 700 nm. LED's can be made to emit many different frequencies, depending upon the particular phosphor, or mixture of phosphors used. I have used one particular frequency on my eyes, with some noticeable success. You can probably find information on this topic by searching the net, as I posted on it quite some time ago, some rather detailed information, and there are likely others by now who have picked up on it and furthered it. But keep in mind that advertisements which merely specify LED mean nothing, since LED's are used to emit many different colors (freqs) of light. My favorite for pineal stimulation remains a pumped xenon flash coil due to its wide spectrum. Silvering a whole quartz crystal, such as via Brashear's method, with the end masked with tape or the like, makes an excellent director. Choose a crystal that is more round from the end perspective, than those quartz crystals which have odd lengths on their six sides. After the silvering process, laquer over the silver with shellac, wait a day, then remove the mask from the facets on the tip.
 

 
Printer-friendly version of this page Email this message to a friend
Alert Moderators
Report Spam or bad message  Alert Moderators on This GOOD Message

This Forum message belongs to a larger discussion thread. See the complete thread below. You can reply to this message!


 

Donate to CureZone


CureZone Newsletter is distributed in partnership with https://www.netatlantic.com


Contact Us - Advertise - Stats

Copyright 1999 - 2024  www.curezone.org

0.109 sec, (1)