Hi Roxe,

Glad to hear you're experiencing positive results already.

I received a stainelss steel (drink) mixer in a glass set as a Christmas gift from my son & daughter in law. Coincidence? I think not... I think it was a sign. Anyhow, I put it to use everyday to use Pat's simple method of Energizing water right at my desktop, and on demand. So I sip the water throughout the day. I have to tell you the addition of the lemon and Sea Salt has been incredible in the results I see.

I added cayenne to my regimen after reading an inspiring, very touching testimonial here at CureZone at the MS forum.

Here is the link, I think you will enjoy reading through it:

//www.curezone.org/forums/m.asp?f=6&i=618

There is so much information and so many caring souls here that will not only provide guidance and information but plenty of inspiration as well.

Please do keep posting your progress and keep your spirits rising high. It is through your mind/spirit re-connection that you will reap the most benefits in your journey to health.

You are already on your way...

X0X0 - MadArt (ist)

//www.curezone.org/forums/description.asp?f=218

"Energized Water Support Forum

To energize water you will need:
Water - boil first to kill any critters that might also benefit from the negative charge.
A stainless steel or enamel container - a saucepan will do fine. Or you can construct a modified leydon jar by lining a plastic container, inside and out, almost to the top, with aluminum foil. The foil must fit snugly and cover the bottom as well as the sides. I use a 3lb. margerine tub.
A battery: I prefer a C or D battery - a weak battery won't work properly.
2 pieces of wire or 1/2in. strips of aluminum foil about 6 inches long. I use wire from an old toaster cord and stripped about 1/2in. of plastic from the ends.

Water is neutral by nature and giving it a negative charge is a simple matter of removing protons. To do this:


Fill your container about half full.
Hold the two pieces of wire to the positive and negative poles of the battery with the thumb and forefinger of one hand.
Place the positively attached wire inside the container and the negatively attached wire on the outside above the water line.
Pinch the wires together firmly for a second or two with the container side between them. You should feel no heat.
In electricity, positive follows the negative and so some protons will be removed. This will leave the water with a mild negative charge. Electrons and protons tend to jump back and forth, so don't pinch the wires together for too long or you might not get the results you need."

***
Unfortunately, Pat's website with pics and everything is down, so the links are not working for a while now....

You can read through PatriciaM 's old posts, she answers many questions you may also have...

Enjoy! I still do this daily at least 3 times a day.

madArt (ist)

first off its best to post a new message rather than respond to a thread that is months old.

as far as your quesiton goes, no the wire should not be immersed in the water. put the wire inside the bowl just above the water line, and the one outside the bowl directly across from the one inside, so that if the bowl were not there the two wires should touch. it helps to do it in a slightly dark room so you can see the spark. don't hold the wires on the bowl for long periods, hold one wire to the bowl firmly, and just briefly touch the other wire to the bowl, long enough to get a visible spark. you WONT be harmed in any way, i have dont this many many times and never got a jolt.

hope that helps. if you have any other questions, please post a new message on the most current page.