I have been using Rife Technology for about 4 years now. It can be effective BUT for many it is not effective due to a lack of understanding of the technology. I will explain. People tend to be influenced by the various firms competing to sell them a device using the rife frequencies. These firms tend to focus on the intrinsic features they have incorporated into their machines and by and large tend to avoid educating the customer about the truth which is they MUST know the exact frequency of what they are trying to kill. If the exact frequency of the target is known most of the serious machines have the ability to kill it. It also helps greatly if you know what it is you are trying to kill. Sometimes it makes sense to use standard medical resources for their diagnostic skill, they are way better at diagnosis than cure.
Now many companies that sell devices post various lists of rife frequencies misleading people into thinking that all they need to do is look up their ailment on the list and run the listed frequency(s). It would be nice if it were so simple. When you get into this stuff deeper you will have a good chance of finding out that these frequencies found on these lists will not work for you, this is not to say that they will not work for some. Why won't they work? Well for many reasons. One is the virus, bacteria, etc mutated over time, or in your body and it is now on another frequency somewhat variant. Another reason is these bugs tend to cluster up for protection, I suppose when they detect they are endangered and this will alter their frequency. So to be effective at bug killing using rife technology you've got to be able to get the right frequency.
I want to interject a thought or two here. One is I am not a manufacturer, dealer, reseller etc of any rife or rife type product, nor do I sell anything healthcare related or even close to this field. I have no axe to grind or goods to promote. I have personally owned a lot of equipment most of which I sold in the used market after not being satisfied with it. Secondly this is complex stuff you are getting into and if it seems overwhelming try an alternative approach other than rife or use a professional who knows how to use rife technology.
Look out for people who say they can scan your body using your pulse to tell which frequencies are correct. Basically this approach works like this: Your body is subjected to various frequencies and the operator takes your pulse constantly and when your pulse jumps it is considered a hit. This is grossly subjective, a heart flutter could cause this as can a car backfiring. Also how do they scan through all the frequencies, would take long time. I do not consider this a valid approach, it is a way for a practitioner to tell the client he can detect the frequencies. At times it may be effective but I would not trust it especially if you had a dread disease.
There are machines out there that can detect the frequency needed. This is probably where you want to go. The F-scan 2 is one such device. Costly but can be effective.
There is another common mistake beginners make. They get some sort of rife machine run some frequencies and they get a herxheimer reaction. Usually they are running typical standard type frequencies like 727, 1550, 650, 5000, 10,000 etc. If they are say 40 years old there is a 40 year build up of junk so sure they are gonna get some hits on bad bugs and other things but not necessarily killing the ones responsible for the disease in question. Sure they are doing themselves some good, killing off these bugs frees their immune system for better combat. There is a device out there that scans through all the known rife frequencies and hits each frequency very very briefly. It shotguns every frequency but each one only very briefly, maybe too briefly. This device is powerful. I use to think this machine was the king until I recently had a nose cold. I spent several hours a day running this machine and poured herbs into myself and flushed with water and it took four days to get free of this bug. I was never bed ridden but felt lousy. I am not sure what happened here. Could be bug replicated very fast (mutated in a sense), could be it had some sort of defense mechanism like it clinged to lots of other cells so as to insulate the cells in the interior of the cluster from the frequency but as I said this machine throws strong frequencies and should go therough whole body, I am not sure why this happened maybe it reproduced vary fast? Normally I would have seen the cold pass within 8-24 hours using this machine with herbs, Colloidal Silver , ozonated water etc. Is it me, doubtful. The MD protocol for getting others better with this (it starts as a cold then goes to saw throat, cough, fever etc) has been oral amoxicillin, with five strong Antibiotic injections one per day for five days (I am not in the USA but in a semi-third world nation) and what the MD thinking is I am not sure, probably to cure secondary infection (bacterial) and hope the body can overcome the viral by itself.
I would encourage you to use two different types of rife technology but always know the correct frequency. I wish I had an Fscan 2, I sold mine (original f scan) and now need to get an Fscan2, I had the older one. I believe if I was able to hit the exact frequencies it would have passed in hours not days. The pad or handle type devices work and so do the good plasma tube models BUT only if you get the correct frequency.
Once I had a well know hand held rife machine. I never really flety like anything happened with this machine. I had a meter to calibrate another manual plasma rife machine, and used the meter to see if this rife was sending signals and if the frequencies were accurate - they were spot on. I had previously run all the canned rife frequencies from the lists with my plasma machine so when I ran this handheld I felt nothing since whatever was aqround that would respond to these canned frequencies was already killed. I sold the machine to someone who had lyme disease and they ran it briefly and got herxheimers right away, so the problem was I did not know the correct frequency to use. I think rife knew the frequency of the bug on a microscope but did not know what frequency it was suseptible to in the human body when surrounded by liquids, tissue, and when they were clustered up together. The frequency from the microscope was probably close enough to damage them anyway or at least the ones exposed the most to the frequency, or disable them, or get them sick/crippled whatever and in some cases they probably did blow up or rupture. Rife did not have a f-scan 2 to tell him the correct frequency in the body for the pathogen.
Rife is a complex process. Once you get the correct frequency like with the f-scan2 then you need to figure out how much time to spend on this frequency per day. You need to learn all about herxheimer reactions and using ozonated water to overcome them. If you have a dread disease herxheimer reactions could be fatally toxic so you got to learn about this for real.
There are other effective technologies as well, most are far less costly than Rife and easier to make work effectively. Bob Beck worked up three devices for people. One was a Colloidal Silver maker. This makes "junk" Colloidal Silver but still somewhat effective and if you are on a tight budget this might be all you can afford so it will need to do. Next is the magnetic pulser. This is a great machine that is relatively cheap. Dr. Beck used to make multi-wave oscillators that fit into a briefcase and got a serious warning from the US gov't so he knocked this off and was from that point on very very careful about touting healing claims. This machine can do a lot more than what people say, they are afraid. If you have a saw throat and have it go across your throat say every hour in a few hours you should be about all healed assuming you got it on early onset. If you are constipated run it all over your intestines from the front and rear and see the bowel movements you have in a few hours. This will also kill or disable parasites which is often a cause of constipation. Got a nose cold run it across your nose but not into your brain or eyes and it will clear up your nose, do it say every hour and should be nice and dry in a few hours. I expect you could kill a tumour layer by layer with this. Got a local infection run it on it for 20-30 minutes every few hours, also kills athletes foot. Now comes Becks blood purifier which will kill many many bad things as they travel through the blood. Problem is many bad bugs hide out places where there is little circulation and the device will miss them to some extent. Again best to use more than one approach. Use the magnetic pulser to clear your lymph and this should help your body fight better. Use good colloidal silver to get to them. Get a machine that raises the PH of water which will raise your ph and get them. Get a Far Infrared Sauna with an ozonator and get them. Heck go sit in a hot bath for as long as you can take it and get some. Learn about the approaches I mentioned.
Learn about the molecular enhancer. These machines can be had with shipping for under $1000. You basically hold a special light bulb with your feet on an aluminum type plate. Current goes through the light and you feel it going into your body - you can control intensity. It takes 2 hours for a treatment. I had one early on in my collection of machines and still have one. Had a cold once. Went on it for two hours. I could literally feel something coming out of my skin pores all over my body, like a sharp tingling. Few hours after treatment cold was much much better, and I felt lot more like myself. Took a jacuzzi after and all sorts of brown stuff was on my skin that collected on white tub walls? Next day did another treatment and it destroyed any remnants of the cold. It is simple, basic yet effective and requires no knowledge of frequencies. One can hold the bulb on a body part or spot for concentrated results. Do I think this would work on dread diseases - yes. Why don't you hear more about these machines? For one a person could built their own for maybe $500 so there is not much profit in it for the manufacturer. Secondly it is inconvenient to hold the bulb for two hours - bulb gets hot, if you touch something wrong you get a scary and uncomfortable staic electric shock that is not harmful and of course it is so simple there is not a lot of room for philosphical banter as to which frequency is best, tube or pad, etc. Remember try to not rely on one technology use a few if you can afford it.
Ondamed is a cool machine that now costs $30,000. It scans body for hits and uses it's own frequency system, not rife numbers - many call this secret frequencies and do not like it because it locks the user into using this equipment exclusively. It collects frequencies, identifies by name the pathogen, then treats by using a kill frequency for the things it detected. It is a very effective machine that shouild work nicely on dread diseases and colds. I ran on it a few times. It stopped a minor back pain in seconds. We found parasites in me and started to kill them. They were in my chest area and after we hit them with the correct frequency in the chest we did a scan to see if they were dead and we found some of them moved into the arms and had to kill them there, then some went to the head and we killed them there. See this is when I started to learn that these bugs have defense mechanisms and it isn't as simple as rife machine amkers would have you think. One possible shortcoming on the ondamed is that you scan for hits and then the machine tells you what it found by name like staph. Then it uses a frequency to kill staph. I am not sure if finds a mutated bug in another frequency if it will have the correct frequency to kill it. The technology is electromagnetic not pure rife, so it may not make much difference, anyway people seem to get good results with ondamed. You do need an operator to run this machine and need to take a course from them - it is not plug and play.
So learn how to use herbs, learn Bob Beck devices, it you are drawn to Hulda Clark machines learn them I am not into them, learn about colloidal silver, figure out how to make rife work by knowing what frequency to use, for how long etc, use other machines that work as well. Just in passing coconut oil is a great herb, check it out - kils lots of bad stuff. It is a journey that can take you years. If you have a dread disease you may not have years so go to a professional who knows how to make these machines work. If you can't find one near you then go for something like an f-scan 2 which might take 3-5 days to figure out if you pour over the books and mess with it enough, molecular enhancer is another option. There is way more to rifing than what the manufacturers want you to believe but if one does it correct it can be effective, but so are other technologies. Don't buy a rife machine and plan on getting anywhere with the frequencies found in frequency lists, you have a substantial chance of being disappointed.