Tools:

Bucket or basin for mixing.

Moulds, lightly oiled if other than silicone. 

1 or 2 litre measuring jugs. 

Whisk to stir. 

 

Method:   

Before you start, GIVE YOUR PROJECT A GOOD INTENT.  Don’t forget tHAT PLASTER (GYPSUM) IS A CONSCIOUS ENTITY.  My regular intentions are: 

Wishing for the Greatest Good of All, Divine Light, Unconditional Love, Blue Skies – an end to chemtrails.I ask for the selenite to remember the vibrations of chemtrails so it can latch onto them very quickly. 

 I also ask for Selenite to connect to all the Selenite all over the world.  Thus even a small piece will be very powerful.

Calculate what quantity you want to make.  Have your moulds already oiled.  Best to have your Plaster of Paris and sand measured out.  If you have lots of crystal energised water you can use it ‘neat’.   If not, use about one cupful into 3 or 4 litres of ordinary water.  This water will take on the crystal energy.  

Dissolve the salt in some warm or hot water and make up to the required amount with the crystal water/plain water. Pour in the Plaster of Paris and let it soak in the water for a minute or two while thinking/saying your intentions.  Then stir or whisk gently till smooth.  

Quickly add in the sand and stir till mixed in.  Without delay pour into moulds.   If pouring a lot, pour into the smaller moulds first, as the mix will thicken up very quickly.  This is particularly the case when pouring into bottles, probably better to make a rather watery mixture in this case. ADD ROCK CRYSTALS.

For bigger pieces, i.e. cones, try to be patient and wait for at least A DAY BEFORE UNMOULDING.

For smaller pieces they have usually hardened up very quickly.   If you want to paint them, please let them dry out for several days, as a lot of evaporation has to take place. If you are pouring Selenite into bottles for gifting into water, leave them with the tops off for at least 3 days before putting caps on. For gifting outside, in the countryside for example, I usually put the pieces into plastic bags loosely tied at the top, to stop them getting wet.

You can add seashells (spiral type for the Phi effect), small pine cones, essences and essential oils.

The most powerful thing you can make is a Blue Sky Broadcaster, where you make a large cone or other shape, and wrap it with a long length of heavy electric cable (about 20 metres is excellent).   Put a plug at either end, one to attach to an appliance that is preferably left on all the time, the other into a socket.  

This enables the Life Force Energy to flow back into the electric grid and harmonise the whole area. It uses all natural ingredients, i.e. Plaster of Paris, sand, salt, and crystals (or crystallized water). An important aspect during the making of Selenite is to use strong and good intentions. Other ingredients can be added if wished, seashells, essential oils, or essences.

It creates natural healing energy for personal and home healing, and also counteracts the unpleasant health and environmental consequences associated with Geo-Engineering i.e. chemtrails. It converts freshly sprayed chemtrails into the beautiful wispy clouds known as 'sylphs. It seems as though the Universe/Nature has provided a natural answer to an unnatural situation.

 

Plasterite is simple to make 

If interested please watch THESE VIDEOS: 

 How to make Plasterite.

 

 

 

 

 

 

 

 

 

 Plasterite by Jenny

 

For much more detailed information on everything to do with Plasterite

Please look at the following website:   https://seleniteplus.discussion.community/