http://library.albany.edu/imc/pdf/iMovie9audio_Editing_extracting.pdf



Good find,

9;57 pm
February 20, 2011

Extract audio from a video clip

When clips are imported into iMovie, the audio and video are locked (joined in synchrony). Keep audio and video synchronized whenever possible. If you do need to separate them make sure every other possible form of editing (video or audio) is done first. Once audio and video are unlocked and separated, they cannot be locked again. After unlocking, each component must be moved separately for the duration of the editing process. To separate audio and video:
DO THIS CAREFULLY! ONCE AUDIO IS DETACHED IT CANNOT BE REATTACHED
Page 2 of 3
Select the clip. From the Edit menu, select Detach audio. Tip: to separate audio and video for the entire project, from the Edit menu, choose Select All, then Extract audio; to separate the audio and video for a selected clip, select only that clip before extracting audio.
Once the track is isolated, you can edit, move, copy or crop it. To remove audio select the Audio clip. Right click and choose “Delete Selection”. Caution: This will permanently remove the audio from your project!
If you wish to remove the audio from part of a clip, split the clip first.

 

Popularity:   message viewed 3749 times
URL:   http://www.curezone.org/blogs/fm.asp?i=1772798

<< Return to the standard message view

Page generated on: 8/26/2024 11:40:06 PM in Dallas, Texas
www.curezone.org