As you can see from the cabinet design in Step 5, the base enclosure has an internal support to strengthen the external walls and reduce noise. These shelves are usually cut from 3/4" sliced ​​and sliced ​​similar to Swiss cheese to allow air to circulate, divide the drawers and not obstruct the airflow inside.

The internal mount should be anywhere on the speaker audio text to audio converter the cabinet needs strengthening, such as the bracket closest to the speaker and centered on both sides.

The tower speaker free text to speech has two shelves inside. While bookshelf speakers have only one position.

Draw a simple circle or square on the rug. Then use a drill with a large drill bit to make holes to start a jigsaw. Then use the saw to connect the drilled holes and draw the cut line to make a speaker text to audio.

The photo below ends with the subwoofer mounting bracket. This provides a larger cut-out for larger and slightly larger subwoofer drivers.

Mark and cut the cookie joints

Just like most professional kitchen cabinet manufacturers. We used cookie connectors to hold the speakers Text to Speech together. Easy and perfect alignment of adjacent surfaces Ultra-fast and robust cutting and installation

First, mark the adjacent surfaces with the desired pattern or code. All you have to do is assemble the speaker board correctly. And mark adjacent edges with codes such as “a”, “b”, “c” or “circle”, “square”, “triangle”, etc. Then I marked it with little dashes and brushed both edges to light the connector cookie and let it sink in. Draw a long line on the face and cut a groove so it doesn't get lost in the wrong face.